Поиск аналогов электронных компонентов
FTD-011
StegoГермания

FTD-011

Производится

Fest eingestellte Thermostat-Öffner (NC) und Thermostat-Schließer (NO) in einem Gehäuse. Das Doppelthermostat schaltet im Gegensatz zu Thermostaten mit Wechselkontakt unabhängig. Dadurch können Heizungen und Kühlgeräte in verschiedenen Temperaturbereichen geschaltet werden.

Подобрать аналогСпросить AI FAEДаташит PDF

Все аналоги

Полный отчёт

Технические параметры

Питание
Inrush current16 A
Inrush current duration10 s
Reference voltage24 V
Reference voltage 2120 VAC
Reference voltage 2 ohmic120 VAC
Reference voltage dc ohmic30 VDC
Reference voltage inductive maximum250 VAC
Reference voltage ohmic250 VAC
Switching current20 mA
Switching current 2 inductive2 A
Switching current 2 ohmic10 A
Switching current dc ohmic1 A
Switching current inductive1,6 A
Switching current ohmic5 A
Условия эксплуатации и корпус
Height47 mm
MountingClip for 35 mm DIN rail, EN 60715
Operating temperature-40 °C - 80 °C
Storage temperature-45 °C - 80 °C
Switch-off temperature15 °C
Switch-off temperature 2 tolerance± 6 K
Switch-off temperature tolerance± 5 K
Switch-on temperature5 °C
Switch-on temperature 2 tolerance± 7 K
Switch-on temperature tolerance± 5 K
Другое
01163.0-00+40 °C | 50 °C
01163.0-02+25 °C | 35 °C
AC/DCAC;DC
CasingPlastic to UL94 V-0, light grey
Connection2-pole clamp: Rigid wire/stranded wire 2.5 mm² (AWG 14)
Contact typeSnap-action contact
Depth33 mm
DesignNormally closed (NC); Normally open (NO)
Device typeThermostats
Minimal switching capacity0,48 W
NoteOther switch-on/switch-off temperatures on request. Wire end ferrules must be used for connections with stranded wires. Switching of resistive load (switching of inductive load).
Operating humidity≤90 % RH
Protection typeIP20
SensorThermostatic bimetal
Service life>100000 cycles
Setting rangefirm
Storage humidity≤90 % RH
Switching capacityAC 250 V: 5 (1.6) A; AC 120 V: 10 (2) A; DC 24-72 V: 30 W
Torque0,8 Nm max.
Weight40 g
Width63 mm

Изображения

Документы