StegoGermany
FTD-011
ActiveFest eingestellte Thermostat-Öffner (NC) und Thermostat-Schließer (NO) in einem Gehäuse. Das Doppelthermostat schaltet im Gegensatz zu Thermostaten mit Wechselkontakt unabhängig. Dadurch können Heizungen und Kühlgeräte in verschiedenen Temperaturbereichen geschaltet werden.
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Inrush current | 16 A |
| Inrush current duration | 10 s |
| Reference voltage | 24 V |
| Reference voltage 2 | 120 VAC |
| Reference voltage 2 ohmic | 120 VAC |
| Reference voltage dc ohmic | 30 VDC |
| Reference voltage inductive maximum | 250 VAC |
| Reference voltage ohmic | 250 VAC |
| Switching current | 20 mA |
| Switching current 2 inductive | 2 A |
| Switching current 2 ohmic | 10 A |
| Switching current dc ohmic | 1 A |
| Switching current inductive | 1,6 A |
| Switching current ohmic | 5 A |
| Environment and package | |
| Height | 47 mm |
| Mounting | Clip for 35 mm DIN rail, EN 60715 |
| Operating temperature | -40 °C - 80 °C |
| Storage temperature | -45 °C - 80 °C |
| Switch-off temperature | 15 °C |
| Switch-off temperature 2 tolerance | ± 6 K |
| Switch-off temperature tolerance | ± 5 K |
| Switch-on temperature | 5 °C |
| Switch-on temperature 2 tolerance | ± 7 K |
| Switch-on temperature tolerance | ± 5 K |
| Other | |
| 01163.0-00 | +40 °C | 50 °C |
| 01163.0-02 | +25 °C | 35 °C |
| AC/DC | AC;DC |
| Casing | Plastic to UL94 V-0, light grey |
| Connection | 2-pole clamp: Rigid wire/stranded wire 2.5 mm² (AWG 14) |
| Contact type | Snap-action contact |
| Depth | 33 mm |
| Design | Normally closed (NC); Normally open (NO) |
| Device type | Thermostats |
| Minimal switching capacity | 0,48 W |
| Note | Other switch-on/switch-off temperatures on request. Wire end ferrules must be used for connections with stranded wires. Switching of resistive load (switching of inductive load). |
| Operating humidity | ≤90 % RH |
| Protection type | IP20 |
| Sensor | Thermostatic bimetal |
| Service life | >100000 cycles |
| Setting range | firm |
| Storage humidity | ≤90 % RH |
| Switching capacity | AC 250 V: 5 (1.6) A; AC 120 V: 10 (2) A; DC 24-72 V: 30 W |
| Torque | 0,8 Nm max. |
| Weight | 40 g |
| Width | 63 mm |
Documents
DatasheetDatasheet · 242.6 KB · 2026-09-24DatasheetDatasheet · 242.5 KB · 2026-09-24DatasheetDatasheet · 242.5 KB · 2026-09-24DatasheetDatasheet · 242.3 KB · 2026-09-24DatasheetDatasheet · 241.9 KB · 2026-09-24DatasheetDatasheet · 241.8 KB · 2026-09-24DatasheetDatasheet · 241.8 KB · 2026-09-24DatasheetDatasheet · 241.6 KB · 2026-09-24
Open document center