Результаты поиска:TXB0104

IC TRANSLTR BIDIRECTIONAL 14SOIC

IC TRANSLTR BIDIRECTIONAL 14SOIC

IC TRANSLATOR BIDIR 14TSSOP

IC TRANSLTR BIDIRECTIONAL 14SOIC

IC TRANSLATOR BIDIR 12NFBGA

IC TRANSLTR BIDIRECTIONAL 14VQFN

IC TRANSLTR BIDIRECTIONAL 12BGA

IC TRANSLATOR BIDIR 14TSSOP

IC TRANSLTR BIDIRECTIONAL 14VQFN

IC TRANSLTR BIDIRECTIONAL 14VQFN

IC TRANSLTR BIDIRECTIONAL 12UQFN

IC TRANSLTR BIDIRECTIONAL 14SOIC

TXB0104BQAR

IC TRANSLTR BIDIRECTIONAL 12BGA

IC TRANSLTR BIDIRECTIONAL 12UQFN

Voltage-level translators address the challenges posed by simultaneous use of different supply-voltage levels on the same circuit board. This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.1V to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65V to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To establish high-impedance state during power up or power down, OE must be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. The TXB0104W is designed so that the OE input circuit is supplied by VCCA. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

IC TRANSLATOR BIDIR 12DSBGA

IC TRANSLATOR BIDIR 14TSSOP