Fair-Rite Products Corp.

FERRITE BEAD 105 OHM 2SMD 1LN

EXPANDED SNAP-IT KIT #34

61 ROUND CABLE CORE

FERRITE BEAD 2SMD 1LN

FERRITE BEAD AXIAL 1LN

FERRITE BEAD 1206 4LN

MULTI-LAYER CHIP BEAD

FERRITE BEAD AXIAL 1LN

FERRITE BEAD AXIAL 1LN

43 ROUND CABLE CORE

46 ROUND CABLE CORE

FERRITE CORE 190OHM SOLID 9.53MM

FERRITE BEAD 105 OHM 2SMD 1LN

FERRITE BEAD 30 OHM 0805 1LN

FERRITE BEAD 100 OHM 1806 1LN

FERRITE CORE TOROID 125 PERMEABILITY 50-75W

Part Number: 9467226002 617PLANAR E CORE 43/9.5/28 Planar EE and EI cores, with their low profile are suitable for board level installation allowing assembly without the need for plastic coilformers and can also allow windings integrated into multi-level PCBs. Planar ER cores with their low mass and low profile are suitable for Surface Mount installations in low power filter and transformer applications. -Planar EE, ER and EI cores can be supplied with the center post gapped to a mechanical dimension, or an A value. 33 (g) Σl/A : Core Constant, l : Effective Path Length, A : Effective Cross-Sectional Area, V : Effective Core Volume A : Inductance Factor Explanation of Part Numbers: Digits 1 & 2 = product class and 3 & 4 = material grade. A value is measured at 1 kHz, B < 10 gauss. A high frequency NiZn ferrite intended for broadband transformers. Antennas and Hi Q inductor applications up 50MHz. Excellent stability characteristics. Multi-Aperture Beads Rods Toroids Application Specific Custom Components **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated. (see graph below)

Part Number: 9367071002 67 Plate- I43/4.1/28 Planar EQ and EQI cores, with their low profile, are suitable for board level installation allowing assembly without the need for plastic coilformers and can also allow windings integrated into multi-level PCBs. Planar EQ cores with their low mass and low profile are suitable for Surface Mount installations in low power filter and transformer applications. – Planar EQ and EQI cores can be supplied with the center post gapped to a mechanical dimension, or an A value. (g) Σl/A : Core Constant, l : Effective Path Length, A : Effective Cross-Sectional Area, V : Effective Core Volume A : Inductance Factor Explanation of Part Numbers: Digits 1 & 2 = product class and 3 & 4 = material grade. A value is measured at 1 kHz, B < 10 gauss. is mated with A high frequency NiZn ferrite intended for broadband transformers. Antennas and Hi Q inductor applications up 50MHz. Excellent stability characteristics. Multi-Aperture Beads Rods Toroids Application Specific Custom Components **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated. (see graph below)

Part Number: 0444184651 44 OVAL CABLE CORE ASSEMBLY – Digits 1 & 2 = Product Class – Digits 3 & 4 = Material Grade The B dimension is the core inside diameter. (g) + Test frequency •For solid cable cores, see Round Cable EMI Suppression Cores Round cable snap-it™ assemblies are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%. Single turn impedance tests for 31, 43 and 46 material cores are performed on the E4991A/HP4291B Impedance Analyzer. The 61 material parts are tested on the E4991A / HP4291B Impedance Analyzer and 75 material parts are tested on the E4990A Impedance Analyzer. Cores are tested with the shortest practical wire length. A NiZn ferrite developed to combine a high suppression performance, from 30 MHz to 500 MHz, with a very high DC resistivity. SM Beads PC Beads Wound Beads Round Cable Snap-Its Connector EMI Suppression Plates **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Part Number: 0461184651 61 OVAL CABLE CORE ASSEMBLY – Digits 1 & 2 = Product Class – Digits 3 & 4 = Material Grade The B dimension is the core inside diameter. (g) + Test frequency •For solid cable cores, see Round Cable EMI Suppression Cores Round cable snap-it™ assemblies are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%. Single turn impedance tests for 31, 43 and 46 material cores are performed on the E4991A/HP4291B Impedance Analyzer. The 61 material parts are tested on the E4991A / HP4291B Impedance Analyzer and 75 material parts are tested on the E4990A Impedance Analyzer. Cores are tested with the shortest practical wire length. A high frequency NiZn ferrite developed for a range of inductive applications up to 25 MHz. This material is also used in EMI applications for suppression of noise frequencies above 200 MHz. Excellent stability characteristics. EMI Suppression Beads Beads On Leads SM beads Wound Beads Multi-Aperture Cores Round Cable Snap-Its Toroids Rods Antenna/RFID Rods Round EMI Suppression Cores **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.