StegoГермания
MFR-012-1
ПроизводитсяDer Hygrostat wird zur Vermeidung von Kondenswasser eingesetzt und regelt Heizungen und Lüfter. Ab einer kritischen relativen Luftfeuchtigkeit von 65 % wird die Temperatur erhöht, sodass die relative Luftfeuchtigkeit sinkt und die Bildung von Kondenswasser verhindert wird.
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| Inrush current | 16 A |
| Inrush current duration | 10 s |
| Reference voltage | 20 V |
| Reference voltage 2 ohmic | 120 VAC |
| Reference voltage dc ohmic | 30 VDC |
| Reference voltage ohmic | 250 VAC |
| Switching current | 0,1 A |
| Switching current dc ohmic | 0,6 A |
| Switching current ohmic | 5 A |
| Условия эксплуатации и корпус | |
| Height | 67 mm |
| Mounting | Clip for 35 mm DIN rail, EN 60715 |
| Operating temperature | 0 °C - 60 °C |
| Storage temperature | -40 °C - 60 °C |
| Другое | |
| AC/DC | AC;DC |
| Casing | Plastic to UL94 V-0, light grey |
| CCC | CQC |
| Connection | 3-pole clamp: Rigid wire cable 2.5 mm² (AWG 14) Stranded wire² 1.5 mm² (AWG 16) |
| Contact type | Snap-action contact |
| Depth | 38 mm |
| Design | Changer |
| Device type | Hygrostat |
| Note | Switching differential related to 50 % rH. Wire end ferrules must be used for connections with stranded wires. |
| Operating humidity | ≤95 % RH |
| Protection type | IP20 |
| Service life | >50000 cycles |
| Setting range | 35 % RH - 95 % RH |
| Storage humidity | ≤95 % RH |
| Switching capacity | AC 5 A;DC 20 W |
| Switching differential | 4 % RH |
| Switching differential tolerance | ± 3 % RH |
| Torque | 0,5 Nm max. |
| Weight | 60 g |
| Width | 50 mm |