StegoГермания

KTO-111

Производится

Das mechanische NC Thermostat öffnet bei steigender Temperatur und wird zur Regelung von Heizgeräten oder zum Schalten von Signalgebern bei Temperaturunterschreitung eingesetzt. Durch den Einsatz von Push-In Klemmen wird das Lösen der Zuleitungen verhindert.

Спросить AI FAEДаташит PDF

Все аналоги

Полный отчёт

Технические параметры

Питание
Inrush current	16 A
Inrush current duration	10 s
Reference voltage	24 V
Reference voltage 2	120 VAC
Reference voltage 2 ohmic	120 VAC
Reference voltage dc ohmic	30 VDC
Reference voltage inductive maximum	250 VAC
Reference voltage ohmic	250 VAC
Switching current	20 mA
Switching current dc ohmic	1 A
Switching current inductive	2 A
Условия эксплуатации и корпус
Height	60 mm
Mounting	Clip for 35 mm DIN rail, EN 60715
Operating temperature	-45 °C - 80 °C
Storage temperature	-45 °C - 80 °C
Другое
11100.0-00	0 °C - 60 °C \| AC 250 V: 10 (2) A; AC 120 V: 15 (2) A; DC 24-72 V: 30 W \| 10 A
11100.0-01	-10 °C - 50 °C \| AC 250 V: 10 (2) A; AC 120 V: 15 (2) A; DC 24-72 V: 30 W \| 10 A
11100.0-02	20 °C - 80 °C \| AC 250 V: 3 (2) A; AC 120 V: 3 (2) A; DC 24-72 V: 30 W \| 3 A
11100.9-00	32 °F - 140 °F \| AC 250 V: 10 (2) A; AC 120 V: 15 (2) A; DC 24-72 V: 30 W \| 10 A
11100.9-01	14 °F - 122 °F \| AC 250 V: 10 (2) A; AC 120 V: 15 (2) A; DC 24-72 V: 30 W \| 10 A
AC/DC	AC;DC
Casing	Plastic to UL94 V-0, light grey
CCC	CQC
Connection	2 push-in terminals Rigid wire cable 2.5 mm² (AWG 14) Stranded wire 1.5 mm² (AWG 16)
Contact type	Snap-action contact
Depth	41 mm
Design	Normally closed (NC)
Device type	Thermostats
Minimal switching capacity	0,48 W
Note	Overvoltage category: II: up to 5000 m; III: up to 2000 m.;The controller's contact system is exposed to the effects of the environment, which can change the contact resistance. This can lead to a voltage drop and/or self-heating of the contacts. Stripped length of rigid wire cable: 8 to 12 mm. Wire end ferrules (square or trapezoidal crimped) must be used for connections with stranded wires. Length of wire end ferrule: 8 mm or 12 mm. The height of the current has an influence on the tolerance accuracy, values specified: Switching resistive load (switching inductive load).
Operating humidity	≤90 % RH
Protection type	IP20
Sensor	Thermostatic bimetal
Service life	>100000 cycles
Storage humidity	≤90 % RH
Switching differential	7 K
Switching differential tolerance	± 4 K
Weight	40 g
Width	33 mm

Изображения

Фото · Каталог ChipCross

Документы

Центр документации