StegoГермания

FTO-011

Производится

Das NC Thermostat öffnet bei steigender Temperatur und wird zur Regelung von Heizgeräten oder zum Schalten von Signalgebern bei Temperaturunterschreitung eingesetzt. Die Temperatur ist fest eingestellt. Dadurch erhalten Sie eine hohe Schaltgenauigkeit.

Спросить AI FAEДаташит PDF

Все аналоги

Полный отчёт

Технические параметры

Питание
Inrush current	16 A
Inrush current duration	10 s
Reference voltage	24 V
Reference voltage 2	120 VAC
Reference voltage 2 ohmic	120 VAC
Reference voltage dc ohmic	30 VDC
Reference voltage inductive maximum	250 VAC
Reference voltage ohmic	250 VAC
Switching current	20 mA
Switching current 2 inductive	2 A
Switching current 2 ohmic	10 A
Switching current dc ohmic	1 A
Switching current inductive	1,6 A
Switching current ohmic	5 A
Условия эксплуатации и корпус
Height	47 mm
Mounting	Clip for 35 mm DIN rail, EN 60715
Operating temperature	-40 °C - 80 °C
Storage temperature	-45 °C - 80 °C
Switch-off temperature tolerance	± 5 K
Switch-on temperature tolerance	± 5 K
Другое
01160.0-00	15 °C \| 5 °C
01160.0-01	25 °C \| 15 °C
01160.0-05	10 °C \| 0 °C
AC/DC	AC;DC
Casing	Plastic to UL94 V-0, light grey
Connection	2-pole clamp: Rigid wire/stranded wire 2.5 mm² (AWG 14)
Contact type	Snap-action contact
Depth	33 mm
Design	Normally closed (NC)
Device type	Thermostats
Minimal switching capacity	0,48 W
Note	Other switch-on/switch-off temperatures on request. Wire end ferrules must be used for connections with stranded wires. Switching of resistive load (switching of inductive load).
Operating humidity	≤90 % RH
Protection type	IP20
Sensor	Thermostatic bimetal
Service life	>100000 cycles
Setting range	firm
Storage humidity	≤90 % RH
Switching capacity	AC 250 V: 5 (1.6) A; AC 120 V: 10 (2) A; DC 24-72 V: 30 W
Torque	0,8 Nm max.
Weight	30 g
Width	33 mm

Изображения

Фото · Каталог ChipCross

Документы

Центр документации