Поиск аналогов электронных компонентов
FS1000RST1
FREESOR(飞轩)Китай

FS1000RST1

ПроизводитсяCurrent Sensors

Using Hall effect and open-loop measurement principle, after TRMS calculation, the measured current is converted into DC current or voltage output proportional to the primary current, and the current sensor can measure DC, AC, pulse and various irregular waveforms of current under the condition of electrical isolation. It has the characteristics of high accuracy, high linearity, high integration, small size, simple structure and long-term stability.

Подобрать аналогСпросить AI FAEДаташит PDF

Все аналоги

Полный отчёт

Технические параметры

EL线性度 Linearity | < 0.5 | %FS
f频带宽度 (-3 dB ) Frequency bandwidth(-3dB) | D C ,20 ~ 6000 | Hz
lo电流消耗 Current consumption | Ve=+24V 30+Iour | mA
lom磁失调电压流 Residual voltage | Ip→0 <0.1 | mA
lor失调电流温漂 Offset current temperature drift | Ip=0 TA=-25 ~ +85℃ <0.005 | mA/℃
lou t副边额定输出电流 Rated output voltage | 4 ~ 20(±1%) | mA
lp原边电流测量范围 Measuring range ofprimary current | 0~±150 | 0~±300 | 0~±450 | 0~±600 | 0~±750 | 0~±900 | 0~±1200 | A
lpN原边额定输入电流 Primary nominal input current | 0 ~ 100 | 0 ~ 200 | 0 ~ 300 | 0 ~ 400 | 0 ~ 500 | 0 ~ 600 | 0 ~ 1000 | A
m质量 (约) Quality (approx.) | 248 | g
RL负载电阻 Load resistance | 80 ~ 650 | Ω
TA工作环境温度 Ambient operating temperature | -25 ~ +85 | ℃
Tr响应时间 Response time | <150 | ms
Ts贮存环境温度 Ambient storage temperature | -40 ~ +100 | ℃
Va绝缘电压 Insulation voltage | 在原边与副边电路之间 5kV 有效值 /50Hz/1 分钟 5kV RMS /50Hz/1 min between primary and secondary side circuits
Vo电源电压 Supply voltage | +20 ~ +32(±5%) | V

Изображения

Документы