Поиск аналогов электронных компонентов
104137
Pepperl+Fuchs, Inc.Германия

104137

Производится

Inductive sensor

Подобрать аналогСпросить AI FAE

Все аналоги

Полный отчёт

Технические параметры

Питание
Nominal voltageU o | 8.2 V (R i approx. 1 kΩ)
Характеристики по постоянному и переменному току
Switching frequencyf | 0 ... 100 Hz
Условия эксплуатации и корпус
Ambient temperature-25 ... 100 °C (-13 ... 212 °F)
Другое
ANZEx18.3018X
Assured operating distances a | 0 ... 12.15 mm
Bending radius> 10 x cable diameter
Cable diameter6 mm ± 0.2 mm
CML approvalon request
Colorblue
Connection typecable
Core cross section0.75 mm 2
Degree of protectionIP68
Diameter30 mm
Equipment protection level DaIECEx PTB 11.0037X
Equipment protection level GbIECEx PTB 11.0037X
Equipment protection level Gb IECEx PTB 11.0037X Equipment protection level Da IECEx PTB 11.0037X Equipment protection level Mb IECEx PTB 11.0037XEquipment protection level Gb | IECEx PTB 11.0037X | Equipment protection level Da | IECEx PTB 11.0037X | Equipment protection level Mb | IECEx PTB 11.0037X
Equipment protection level Gb PTB 00 ATEX 2048 X Equipment protection level Da PTB 00 ATEX 2048 XEquipment protection level Gb | PTB 00 ATEX 2048 X | Equipment protection level Da | PTB 00 ATEX 2048 X
Equipment protection level MbIECEx PTB 11.0037X
Housing materialPBT
HysteresisH | 1 ... 5 % typ. 3 %
Installationnon-flush
LengthL | 2 m
Length 44 mm Diameter 30 mmLength | 44 mm | Diameter | 30 mm
MaterialPVC
Measuring plate detected≤ 1 mA
Measuring plate not detectedmin. 3 mA
Measuring plate not detected min. 3 mA Measuring plate detected ≤ 1 mAMeasuring plate not detected | min. 3 mA | Measuring plate detected | ≤ 1 mA
NAMUREN 60947-5-6:2000 IEC 60947-5-6:1999
NAMUR EN 60947-5-6:2000 IEC 60947-5-6:1999 Standards EN IEC 60947-5-2NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | Standards | EN IEC 60947-5-2
Number of cores2
Output typeNAMUR
Rated operating distances n | 15 mm
Reduction factor r 3040.85
Reduction factor r Al0.4
Reduction factor r Cu0.3
Sensing facePBT
StandardsEN IEC 60947-5-2
Switching functionNormally closed (NC)
UL approvalcULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 8.2 V DC
Use in the hazardous areasee instruction manuals
Wire end ferrulesyes

Изображения

Документы

К этому компоненту пока не привязаны документы.