Pulse drive is used in a control motor, for example, so reflected waves resulting from impedance mismatching between the cable, motor, and control section are superimposed on the signal, resulting in cools which become high voltage noise cools.
Все аналоги
Полный отчётТехнические параметры
| Характеристики по постоянному и переменному току | |
|---|---|
| Noise current collection efficiency (reference value) (*3) | 0.5 |
| Power line-to-ground (shield) impedance (Ω) | 110 |
| Условия эксплуатации и корпус | |
| Conductor size(mm2) | Insulation Outer diameter(mm) |
| Другое | |
| Cable type | Product code |
| Fixed part | SYM 3×0.75SQ(2501) |
| Item | Conventional product (1) VCT (unshielded)(*1) |
| Moving part | SYM-F 3×0.75SQ(2501) |
| Official series page | https://www.okidensen.co.jp/en/prod/cool/sym.html |
| Sliding bending | 10 million times or more (Bend radius : Approximately 10 times the cable’s outer diameter) |
| Swinging | 10 million times or more (Bend radius : Approximately 3 times the cable’s outer diameter) |
| SYM 3×1.25SQ(2501) | 1.25 |
| SYM 3×2SQ(2501) | 2 |
| SYM 3×3.5SQ(2501) | 3.5 |
| SYM 3×5.5SQ(2501) | 5.5 |
| SYM 3×8SQ(2501) | 8 |
| SYM-F 3×1.25SQ(2501) | 1.25 |
| SYM-F 3×2SQ(2501) | 2 |
| SYM-F 3×3.5SQ(2501) | 3.5 |
| SYM-F 3×5.5SQ(2501) | 5.5 |
| SYM-F 3×8SQ(2501) | 8 |
Изображения
Документы
К этому компоненту пока не привязаны документы.