Pepperl+Fuchs, Inc.Германия
85043
ПроизводитсяRetroreflective sensor, flat design, M3 mounting, 1500 mm detection range, red light, dark on, PNP output, fixed cable
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| No-load supply current | I 0 | < 10 mA |
| Operating voltage | U B | 12 ... 24 V |
| Switching current | max. 50 mA , resistive load |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 1.5 V DC |
| Характеристики по постоянному и переменному току | |
| Switching frequency | f | approx. 2 kHz |
| Условия эксплуатации и корпус | |
| Ambient temperature | -10 ... 60 °C (14 ... 140 °F) |
| Height | 25.5 mm |
| Height 25.5 mm Width 16 mm Depth 4.1 mm | Height | 25.5 mm | Width | 16 mm | Depth | 4.1 mm |
| Object size | typ. starts from 1.5 mm |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Другое | |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Angle deviation | approx. 0.5 ° |
| Beam divergence | > 5 mrad |
| Cable | PUR |
| Cable length | 2 m |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | 2 m fixed cable |
| Degree of protection | IP67 |
| Depth | 4.1 mm |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | approx. 25 mm at a distance of 1500 mm |
| Effective detection range | 0 ... 1500 mm |
| FDA approval | IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019. |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted |
| Housing | PC (Polycarbonate) and Stainless steel |
| Housing PC (Polycarbonate) and Stainless steel Optical face PMMA Cable PUR | Housing | PC (Polycarbonate) and Stainless steel | Optical face | PMMA | Cable | PUR |
| Laser class | 1 |
| Laser safety | IEC 60825-1:2014 |
| Light source | LASER LIGHT |
| Light type | modulated visible red light , 680 nm |
| Mass | approx. 20 g |
| max. pulse energy | 8 nJ |
| Mission Time (T M ) | 10 a |
| MTTF d | 800 a |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Opening angle | approx. 1 ° |
| Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) |
| Optical face | frontal |
| Polarization filter | yes |
| Product standard | EN 60947-5-2 |
| Protection class | III |
| Pulse length | approx. 3 µs |
| Reference target | H40 reflector |
| Reflector distance | 60 ... 1500 mm |
| Repetition rate | approx. 16.6 kHz |
| Response time | 250 µs |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching type | NO contact / dark-on |
| Threshold detection range | 1800 mm |
| Tightening torque, fastening screws | 1 Nm |
| UL approval | E87056 , cULus Recognized, Class 2 Power Source |
| Wave length | 680 nm |
| Width | 16 mm |
Изображения
Документы
К этому компоненту пока не привязаны документы.