Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| Input current | 5 mA |
| No-load supply current | I 0 | Transmitter unit:≤ 150 mA Receiver: ≤ 150 mA (without outputs) |
| Operating voltage | U B | 24 V DC (-20%, +30%) ; Power supply with safe isolation: 24 V DC |
| Power consumption | P 0 | Transmitter unit: 5 W Receiver: 15 W |
| Switching current | ON: max. 0.1 A; OFF: < 5 µA |
| Switching voltage | 24 V DC |
| Характеристики по постоянному и переменному току | |
| Optical resolution | 90 mm |
| Условия эксплуатации и корпус | |
| Ambient temperature | -35 ... 60 °C (-31 ... 140 °F) |
| Protection field height | see Table 1, max. 2400 mm |
| Storage temperature | -35 ... 70 °C (-31 ... 158 °F) |
| Другое | |
| Ambient light limit | Not sensitive to ambient light in accordance with IEC 61496-2 |
| Category | Cat. 4 |
| CE conformity | CE |
| Connection | Transmitter unit: 4-pin, M12 x 1 connector Receiver: 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm 2 Max. cable length 50 m |
| Degree of protection | IP67 , For indoor use only |
| Depth | 30 mm |
| Effective detection range | 5 ... 20 m |
| Function | Beam Code A: open or 0 V Beam Code B: 24 V DC, 5 mA |
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 |
| Function indicator | Green: OSSD ON , Red: OSSD OFF |
| Housing | extruded aluminum section , gold anodized |
| Housing extruded aluminum section , gold anodized Optical face Plastic pane , Transparent polycarbonate | Housing | extruded aluminum section , gold anodized | Optical face | Plastic pane , Transparent polycarbonate |
| Housing length L | see table 2 |
| Input format | Break contact |
| Input type | Transmitter unit test |
| Light source | IRED |
| Light type | modulated infrared light , 850 nm |
| Mass | see table 2 |
| Mission Time (T M ) | 20 a |
| Opening angle | < 5 ° |
| Operating mode | Startup/restart disable, deactivateable |
| Operation indicator | green: Power on |
| Optical face | Plastic pane , Transparent polycarbonate |
| Output type | Receiver unit OSSD |
| Performance level (PL) | PL e |
| PFH d | Depending on the protection field height; see Manual |
| Photobiological safety | Risk group 0 according to IEC 62471 |
| Product standard | EN 61496-1 ; IEC 61496-2 |
| Protection class | III , IEC 61140 |
| Relative humidity | max. 95 %, non-condensing |
| Response time | see Table 1, max. 17 ms |
| Safety Integrity Level (SIL) | SIL 3 |
| Shock resistance | 10 g , 16 ms ; stationary applications only |
| Signal output | PNP semiconductor , monitored for short and cross circuits |
| Status indicator | Transmitter unit: LED yellow: Mode, test or error Receiver: LED yellow: Start readiness, operating reserve, or error |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| TÜV approval | TÜV SÜD |
| Type | 4 |
| UKCA conformity | UKCA |
| UL approval | cULus Listed |
| UL File Number | E215245 |
| Vibration resistance | 0.35 mm , 10 ... 55 Hz ; stationary applications only |
| Width | 20 mm |
| Width 20 mm Depth 30 mm | Width | 20 mm | Depth | 30 mm |
Изображения
Документы
К этому компоненту пока не привязаны документы.