Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| No-load supply current | I 0 | 40 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 500 mA |
| Switching voltage | max. 30 V DC |
| Характеристики по постоянному и переменному току | |
| De-energized delay | t off | 7 ms |
| Ripple | 10 % |
| Условия эксплуатации и корпус | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -20 ... 75 °C (-4 ... 167 °F) |
| Другое | |
| Adjustment range | 250 ... 1700 mm (on use without fiberoptics) |
| Ambient light limit | 50000 Lux |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | 4-pin, M12 metal connector |
| Control elements | Sensitivity adjuster, light/dark switch |
| Degree of protection | IP65 |
| Detection range | without fiberoptic cable : 0 ... 1700 mm , with fiberoptic cable see selection table for fiberoptic cables |
| Diameter of the light spot | approx. 400 mm at 1700 mm sensor range |
| Function indicator | LED yellow, lights up with receiver lit |
| Housing | brass, nickel-plated |
| Housing brass, nickel-plated Optical face glass | Housing | brass, nickel-plated | Optical face | glass |
| Light source | IRED |
| Light type | modulated infrared light |
| Mass | 370 g |
| Opening angle | approx. 15 ° |
| Optical face | glass |
| Product standard | EN 60947-5-2 |
| Reference target | standard white 200 mm x 200 mm (only for retroreflective fiberoptic cables) |
| Response time | 2 ms |
| Signal output | 1 PNP, not short-circuit protected |
| Switching type | light/dark on |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
Изображения
Документы
К этому компоненту пока не привязаны документы.