Pepperl+Fuchs, Inc.Германия
137999
ПроизводитсяModular inductive sensor for high-temperature applications with rated operating distance 25 mm, with IO-Link interface, consisting of separable inductive sensor head with 0.2 m cable and high temperature connector, 15 m connection cable and amplifier
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| No-load supply current | I 0 | ≤ 40 mA |
| Off-state current | I r | 0 ... 0.5 mA typ. 0.1 µA |
| Operating current | I L | 0 ... 200 mA |
| Operating voltage | U B | 10 ... 30 V |
| Power consumption | P | ≤ 420 mW |
| Rated impulse withstand voltage | U imp | 500 V |
| Rated insulation voltage | U i | 36 V |
| Rated insulation voltage U i 36 V Rated impulse withstand voltage U imp 500 V | Rated insulation voltage | U i | 36 V | Rated impulse withstand voltage | U imp | 500 V |
| Voltage drop | U d | ≤ 3 V |
| Характеристики по постоянному и переменному току | |
| Switching frequency | f | 0 ... 30 Hz |
| Time delay before availability | t v | ≤ 300 ms |
| Условия эксплуатации и корпус | |
| Ambient temperature | 0 ... 250 °C (32 ... 482 °F) Note: M8 connector, 4-pin 0 ... 70 °C (32 ... 158 °F) |
| Height | 44 mm Sensor head |
| Height 44 mm Sensor head Width 40 mm Sensor head Length 67 mm Sensor head | Height | 44 mm Sensor head | Width | 40 mm Sensor head | Length | 67 mm Sensor head |
| Housing Sensor head: PEEK 450, 30% fibre glass amplifier: Stainless steel 1.4305 / AISI 303 Mounting materials Mounting bracket made of aluminum 3.3206 | Housing | Sensor head: PEEK 450, 30% fibre glass amplifier: Stainless steel 1.4305 / AISI 303 | Mounting materials | Mounting bracket made of aluminum 3.3206 |
| Mounting | amplifier: nuts, M18 |
| Mounting materials | Mounting bracket made of aluminum 3.3206 |
| Standards EN IEC 60947-5-2:2020 EN IEC 60947-5-2:2020-03 /RoHs-II Communication interface IEC 61131-9 / IO-Link V1.1.3 | Standards | EN IEC 60947-5-2:2020 EN IEC 60947-5-2:2020-03 /RoHs-II | Communication interface | IEC 61131-9 / IO-Link V1.1.3 |
| Storage temperature | 0 ... 70 °C (32 ... 158 °F) |
| Другое | |
| Actuating element | Steel Fe360 , 75 mm x 75 mm x 1 mm |
| Assured operating distance | s a | 0 ... 20 mm |
| Bending radius | fixed installation 7.5 x cable diameter movable installation 15 x cable diameter |
| Cable diameter | 3.9 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Color | black |
| Communication interface | IEC 61131-9 / IO-Link V1.1.3 |
| Compatible master port type | Class A Class B (use 3-pole adapter or 3-wire cable) |
| Connection assembly | additional M8 plug connector on the sensor head side Cordset M8 plug straight A-coded 4-pin to LEMO-socket straight 4-pin, PFA cable black, shielded |
| Connection type | Connector plug |
| Core cross section | 0.34 mm 2 |
| Default setting | PNP, NO |
| Degree of protection | Sensor head: IP65 amplifier: IP67 connection cable: IP50 |
| Designation | Sync |
| Device ID | 2098689 (0x200601) |
| Device profile | Identification and Diagnosis - I&D Smart Sensor - SSP 1.1 |
| Housing | Sensor head: PEEK 450, 30% fibre glass amplifier: Stainless steel 1.4305 / AISI 303 |
| Hysteresis | H | typ. 5 % |
| Input/output type | 1 synchronization connection, bidirectional |
| Installation | flush mountable |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| IO-Link revision | 1.1 |
| Length | L | 15.2 m individual length specifications: sensor head cable: 0.2 m connection cable: 15 m |
| Mass | 782 g |
| Material | PFA |
| Min. cycle time | 2.3 ms |
| Number of cores | 3 |
| Number of pins | 4 |
| Output polarity | DC |
| Output type | PNP |
| Process data | Input 5 Bit - switching signal 1 Bit - uncertainty indication 1 Bit - status signal 1 Bit - maintenance warning 1 Bit |
| Protection class | III |
| PWIS conformity | VDMA24364-B1/B2/C1/T220°C-W |
| Rated operating distance | s n | 25 mm |
| Reduction factor r 304 | 0.6 |
| Reduction factor r Al | 0.7 |
| Reduction factor r Brass | 1.1 |
| Reduction factor r Cu | 0.7 |
| Reverse polarity protection | reverse polarity protected |
| Scope of delivery | 2 self locking nuts in scope of delivery |
| Shield | grid |
| Short-circuit protection | pulsing |
| SIO mode support | yes |
| Standards | EN IEC 60947-5-2:2020 EN IEC 60947-5-2:2020-03 /RoHs-II |
| Status indicator | Dual color-LED, yellow/green SIO mode: yellow = switching state green = power supply on IO-Link mode: see manual |
| Switching function | Normally open/closed (NO/NC) programmable |
| Threading | M12 x 1 |
| Tightening torque | ≤ 30 Nm |
| Transfer rate | COM2 (38.4 kBit/s) |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| Vendor ID | 1 (0x0001) |
| Vibration resistance | 30 g |
| Width | 40 mm Sensor head |
Изображения
Документы
К этому компоненту пока не привязаны документы.