Pepperl+Fuchs, Inc.Германия
120036
ПроизводитсяRetroreflective sensor with polarization filter for clear object detection
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| No-load supply current | I 0 | < 25 mA at 24 V supply voltage |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 1.5 V DC |
| Характеристики по постоянному и переменному току | |
| Ripple | max. 10 % |
| Switching frequency | f | 500 Hz |
| Условия эксплуатации и корпус | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Height | 44.5 mm |
| Height 44.5 mm Width 11 mm Depth 21.5 mm | Height | 44.5 mm | Width | 11 mm | Depth | 21.5 mm |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Другое | |
| Ambient light limit | EN 60947-5-2 |
| Communication interface | IEC 61131-9 |
| Connection | M8 x 1 connector, 3-pin |
| Contrast detection levels | 10 % - clean, water filled PET bottles 18 % - clear glass bottles 40 % - colored glass or opaque materials Adjustable via rotary switch |
| Control elements | Teach-In key |
| Degree of protection | IP67 / IP69 / IP69K |
| Depth | 21.5 mm |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | approx. 170 mm at a distance of 3.5 m |
| Effective detection range | 0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N" |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| Housing | PC (Polycarbonate) |
| Housing PC (Polycarbonate) Optical face PMMA | Housing | PC (Polycarbonate) | Optical face | PMMA |
| LED risk group labelling | exempt group |
| Light source | LED |
| Light type | modulated visible red light |
| Mass | approx. 10 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 600 a |
| Opening angle | approx. 5 ° |
| Operation indicator | Green LED: Permanently lit - power on Flashing (4 Hz) - short circuit |
| Optical face | PMMA |
| Product standard | EN 60947-5-2 |
| Protection class | III |
| Reference target | H85-2 reflector |
| Reflector distance | 0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N" |
| Response time | 1 ms |
| Signal output | 1 PNP, short-circuit protected, reverse polarity protected |
| Switching type | The switching type of the sensor is adjustable. The default setting is: Q - Pin4: PNP normally open / dark-on |
| Threshold detection range | 6 m |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Usage category | DC-12 and DC-13 |
| Width | 11 mm |
Изображения
Документы
К этому компоненту пока не привязаны документы.