Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| No-load supply current | I 0 | max. 50 mA |
| Operating voltage | U B | 18 ... 30 V DC |
| Power consumption | P 0 | approx. 1.5 W |
| Характеристики по постоянному и переменному току | |
| Angle offset | ± 0.9 ° |
| Axial 24 N Radial 198 N Angle offset ± 0.9 ° Axial offset ± 0.3 mm static; ± 0,1 mm dynamic Radial offset ± 0.5 mm static; ± 0,2 mm dynamic | Axial | 24 N | Radial | 198 N | Angle offset | ± 0.9 ° | Axial offset | ± 0.3 mm static; ± 0,1 mm dynamic | Radial offset | ± 0.5 mm static; ± 0,2 mm dynamic |
| Axial offset | ± 0.3 mm static; ± 0,1 mm dynamic |
| Noise immunity | EN 61000-6-2:2005 |
| Overall resolution | up to 31 Bit programmable |
| Radial offset | ± 0.5 mm static; ± 0,2 mm dynamic |
| Single turn up to 16 Bit programmable Multiturn up to 15 Bit programmable Overall resolution up to 31 Bit programmable | Single turn | up to 16 Bit programmable | Multiturn | up to 15 Bit programmable | Overall resolution | up to 31 Bit programmable |
| Time delay before availability | t v | < 1 s |
| Условия эксплуатации и корпус | |
| Operating temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Другое | |
| Axial | 24 N |
| Climatic testing | DIN EN 60068-2-78, no moisture condensation |
| Communication interface | IEC 61131-9 / IO-Link V1.1.2 |
| Compatible master port type | Class A Class B (use 3-pole adapter or 3-wire cable) |
| Connector | M12 connector, 5 pin , A-coded |
| Degree of protection | DIN EN 60529, IP65, IP67 |
| Detection type | magnetic sampling |
| Device ID | 5243905 (0x500401), 5243906 (0x500402), 5243909 (0x500405), 5243910 (0x500406) |
| Device profile | Identification and Diagnosis - I&D |
| Device type | Absolute rotary encoder as Pure Line |
| Diagnostic Coverage (DC) | 0 % |
| Emitted interference | EN 61000-6-4:2007 |
| Flange | Aluminum |
| Housing | Zinc plated steel, painted |
| Housing Zinc plated steel, painted Flange Aluminum Shaft Stainless steel | Housing | Zinc plated steel, painted | Flange | Aluminum | Shaft | Stainless steel |
| Interface type | IO-Link |
| IO-Link revision | 1.1 |
| L 10 | 5 E+8 revolutions at 24/198 N axial/radial shaft load |
| LED STATUS | LED green flashing with short break (1 Hz) - IO-Link mode |
| Linearity error | ≤ ± 0.1 ° |
| Mass | approx. 370 g |
| Measured variable | position Temperature |
| Min. cycle time | 1.5 ms |
| Mission Time (T M ) | 20 a |
| Moment of inertia | < 30 gcm 2 |
| MTTF d | 566 a at 40 °C |
| Multiturn | up to 15 Bit programmable |
| Process data | Input 12 Byte - measurement value 4 Byte - resolution 16 Bit - auxiliary mesurement value 4 Byte - switching signals 2 Bit - diagnosis signals 2 Bit - status data |
| Radial | 198 N |
| Relative humidity | 98 % , no moisture condensation |
| Rotational speed | max. 12000 min -1 |
| Shaft | Stainless steel |
| Shock resistance | DIN EN 60068-2-27, 100 g , 6 ms |
| Single turn | up to 16 Bit programmable |
| SIO mode support | no |
| Starting torque | < 3 Ncm |
| Transfer rate | COM3 (230.4 kbits/s) |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. |
| UL File Number | E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product. |
| Vendor ID | 1 (0x0001) |
| Vibration resistance | DIN EN 60068-2-6, 10 g , 10 ... 1000 Hz |
Изображения
Документы
К этому компоненту пока не привязаны документы.