parade(谱瑞科技)

Applications

Applications

Applications

Applications

FL1100EX is a 4-port USB 3.2 Gen1 host controller, equips hardware-based multi-stream, multi-threaded parallel processing engines that deliver full bandwidth to each USB 3.2 Gen1 port, and have been further optimized for multiple device operation simultaneously. No firmware and a high level of integration benefits simpler and swifter system integration and adds up to a low TCO. With xHCI 1.0 compliance, FL1100EX guarantees the system has the best compatibility now and in the future and sets the performance standard while delivering even lower power consumption. FL1100EX features 4 USB 3.2 Gen1 downstream ports in a 116-pin, 9mm x 9mm footprint DRQFN (dual-row) package.

The PS8461V is an automotive grade DisplayPort retimer with an integrated 2:1 input multiplexer. It includes an input equalizer to compensate for transmission path loss and a retimer circuit to remove random jitter imparted by signal cross talk and other noise ingress, including noise coupled within the SoC DisplayPort source device. A stable internal clock generator is used to regenerate a jitter-free DisplayPort signal. DisplayPort link rates up to HBR3 (8.1Gbps) are supported.

PS8651V is an advanced DisplayPort 2.1 MST hub which converts the incoming DisplayPort MST data into two DisplayPort or eDP output streams. The DP receiver in PS8651V can take DP link rates up to HBR3 (8.1Gbps/lane). The DP transmitters output the data rate up to HBR3. For eDP output, PS8651V supports the additional eDP link rates of 3.24Gbps and 4.32Gbps, and the EMI friendly reduced TX swings. The side-band channel uses 1Mbps Manchester-coded AUX signaling for DP source to communicate with DP sink. PS8651V is capable of processing up to 8 DP audio-video streams, compressed or uncompressed input. FEC decoding and encoding is used for the reliable reception and transmission of DSC1.2a compressed streams. The video routing logic in PS8651V allows flexible routing of the incoming DP MST steam and converting into any combination of DP MST, SST stream onto the output ports. PS8651V supports single video split into 2 individual segments onto the output ports, along with or without HDCP and/or with eDP ASSR. Each port has its own HPD and AUX interface. PS8651V supports up to 8k x 2k at 60Hz HDR resolution for this splitting video.

The PS8209V is an automotive grade low power HDMI ™ level shifter and redriver that supports -40° to 105°C ambient temperature operation. It supports both AC and DC coupled TMDS™ input signals with up to 6.0Gbps data rate. Device operation and configuration, including redriver equalization settings, can be controlled through pin settings or I2C bus. Automatic power down and squelch provide flexible power management.

The PS8409V is an automotive grade HDMI ™ repeater, or retimer, that removes jitter and fully supports HDMI 2.0 by supporting up to 6.0Gbps TMDS™ data rate. The device integrates a jitter tolerant TMDS receiver and a jitter cleaning TMDS transmitter for HDMI repeater applications. It removes both the data and clock jitter and the timing skews from the TMDS input to deliver a compliant and very low jitter HDMI output. An ambient operating temperature range of -40° to 105°C is supported.

PS8560V is an automotive grade bidirectional linear redriver that supports both PCI Express ® Gen 3, with data rates up to 8.0 GT/s, and SATA, with rates up to 6 Gb/s. The PS8560V operates with a single 3.3V power supply over a -40°C to 105°C ambient temperature range. In a typically application, the PS8560V is placed close to the PCIe ® or SATA connector to compensate for board losses and regenerate high-quality electrical signals for improved link reliability.

PS8561V is an automotive grade bidirectional linear redriver that supports both PCI Express ® Gen 3, with data rates up to 8.0 GT/s, and SATA, with rates up to 6 Gb/s. The PS8561V operates with a single 3.3V power supply over a -40° to 105°C operating temperature range. In a typically application, the PS8561V is placed close to the PCIe ® or SATA connector to compensate for board losses and regenerate high-quality electrical signals for improved link reliability.

PS8580V is an unidirectional, 4-channel linear redriver that supports PCIe® (PCI Express®) Gen 5, with data rates up to 32.0GT/s. PS8580V introduces an ultra-low latency path. It is ideal for automotive applications where ADAS processor utilized PCIe bus to achieve its reliable & massive data transfer tasks. PS8580V comes with very low power which contribute towards lower overall system power and less heat dissipation for the automotive applications.

TT7004V is an automotive grade capacitive touchscreen controller with sensing and processing technology to resolve locations and report positions of up to ten fingers on a touchscreen. This touchscreen controller converts an array of sensor capacitances into an array of digital values that are processed by touch-detection and position-resolution algorithms within the controller.

TC2070V is an automotive grade 1452/1440/1380/1284/1212/1176/1128/1092/1044-channel source driver for high resolution TFT LCD. It is designed for COG (Chip-on-glass) application. The input interface is SIPI™ (Scalable Intra Panel Interface) which was developed and patented by Parade Technologies. SIPI is a high speed, point-to-point interface between the Timing Controller (TCON) and Source Driver (SD), including the TC2016. The SIPI intra panel interface provides scalable bandwidth with reduced bus width, low EMI and low power, a more robust protocol to establish the high-speed link, and enhance system reliability. SIPI was developed to address the newer demands created by increased display performance on notebook and tablet PCs and other consumer electronics applications.

The DP667V is designed for high resolution LCD panels targeting automotive, AIO, and computer monitor applications. It leverages the VESA ® Embedded DisplayPort ™ (eDP) standard and supports up to four eDP Main Link lanes operating up to 5.4Gbps (HBR2). The DP667V supports display resolutions up to 3840×2160 (4K UHD) with 24 or 30-bit -color and a 60Hz refresh rate.

The PS186V is an automotive grade (AEC-100 Grade 2 qualified) DisplayPort ™ v1.4a to HDMI ™ 2.0b video interface converter. The input is a DP v1.4a compliant upstream facing port that accepts audio and display data, and the output is an HDMI 2.0b compliant downstream facing port. In addition to accepting native DisplayPort, the PS186V can also be driven by a USB-C ® interface through the use DisplayPort Alt Mode, which is commonly supported by USB-C enabled devices, including Thunderbolt 3 devices and smartphones, that contain a video source or video pass-through.

The PS8625V is an automotive grade DisplayPort ™ to LVDS converter designed for embedded display applications that utilize a DisplayPort (DP™) or an Embedded DisplayPort (eDP™) video source and a display panel that accepts an LVDS input.

The PS8627V is a video protocol converter that enables ultra-wide displays with resolution up to 7680×1260@60Hz and 30bpp color depth. Its DP/eDP input with up to 4 lanes and an LVDS output up to 6 ports, making it suitable for modern automotive display applications. This technology simplifies system design and reduces costs by eliminating the need for a SERDES for audio/video transport in the automotive display module. The PS8627V serves as a bridge to upgrade existing automotive-grade LVDS panels to eDP interface. It takes advantage of the capabilities of newer SoCs and GPUs that use DP and eDP, providing high-speed data serialization, support for multiple displays. Channel equalization and Link training brings the advancement to enable direct, long-distance connections between the video source and the display. Additionally, eDP/DP ASSR and HDCP brings the protection of streaming premium content for in vehicle infotainment.

The PS8742V supports the requires high-speed signal switching functions for USB Type-C receptacle interface that includes a DisplayPort Branch or Sink function using DisplayPort Alt Mode. The PS8742V includes redriver circuitry for the Super Speed USB and DisplayPort single paths to overcome signal loss in the switch and internal system interconnect.

The PS8750V addresses requirements for the implementation of a USB Type-C connector on a USB host device that supports the VESA ® DisplayPort Alt Mode Standard. It includes the configuration switching for all of the USB Type-C connection signals and a USB PD Controller for management of the USB Type-C interface functions. The PS8750V is designed for automotive applications with an ambient operating temperature range of -40°C to 105°C.