XTALTQUnited States
The VCO series is designed for high frequency applications. Its high frequency capability does not affect performance or price, and it provides a high range of frequency selection, low phase noise, and low harmonics. Push tension is minimized.
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Control Voltage | Vcon | 0V/12.6V |
| Output Power | 0 | 3 | 6 | dBm |
| Supply Current | 18 | 25 | mA |
| Supply Voltage | 4.75 | 5 | 5.25 | VDC |
| Tuning Voltage | 0 | 12 | VDC |
| AC and DC characteristics | |
| Load Impedance | 50 | Q |
| Lower Frequency | 400 | MHz | Vt=0V@ At +25C |
| Phase Noise@100kHz Offset | -125 | -122 |
| Phase Noise@10kHz Offset | -104 | -102 | dBc/Hz | Vt=5V@At +25*C |
| Upper Frequency | 800 | MHz | Vt=12V@ At +25'C |
| Environment and package | |
| Freq. Vs temperature | +5 | 士10 | MHz | -40C~+85C |
| Operating Temperature Range | -40C~+85 |
| RoHS | RHOS Directive 2011/65/EU Annex II Recasting 2002/95/EC |
| Storage Temperature Range | -45C~ +90C |
| Temperature Stress Test | 1IEC60068, GJB360B |
| Other | |
| 2nd Harmonic | -10 | -5 | dBc |
| EMC Test (ESD) | IEC61000, JESD22 |
| ESD, HBM/CDM/MM | 4KVI 2KV/ 200V |
| Input Capacitance | 200 | pF |
| Mechanical Stress Test | IEC60068, GJB360B |
| Min. | Typ. | Max. |
| Parameter | Value | Unit | Condition |
| Pulling, all Phases | 3 | MHz pk-pk |
| Pushing | 5 | MHz/V |
| Solderability | EIAJESD22-B102-C |
| Tuning Sensitivity | 47 | MHz/N |