All alternatives

View full report

Technical parameters

Key specs

ProtocolRS-232
Drivers/Receivers5
Data rate250 kbpsMin · RL = 3KΩ,CL = 1000pF
Supply voltage3 ~ 5.5 V

Datasheet-verified parameters

24 items
ParameterValue and test conditionsSource
ProtocolRS-232 (EIA/TIA-232-F)
Drivers / Receivers5 Drivers / 3 Receivers
Data Rate250 kbps (Min) @ RL = 3KΩ, CL = 1000pF, one driver switching
Supply Voltage+3.0V to +5.5V
Package28 Pin TSSOP
Operating Temperature-40°C to +85°C
GradeIndustrial (implied by -40°C to +85°C range)
RoHSLead Free: Yes
Recommended Operating ConditionsVcc = +3.0V to +5.5V, Tamb = -40°C to +85°C
Absolute Maximum RatingsVcc: -0.3V to +6.0V; V+: -0.3V to +7.0V; V-: +0.3V to -7.0V; V+ + |V-|: +13V; ICC: ±100mA
Supply Current, AUTO ON-LINETyp 1.0 μA, Max 10 μA @ All RxIN open, ONLINE=GND, SHUTDOWN=Vcc
Supply Current, ShutdownTyp 1.0 μA, Max 10 μA @ SHUTDOWN=GND
Supply Current, AUTO ON-LINE DisabledTyp 0.3 mA, Max 1.0 mA @ ONLINE=SHUTDOWN=Vcc, no load
Driver Output Voltage SwingMin ±5.0 V, Typ ±5.4 V @ All driver outputs loaded with 3KΩ to GND
Driver Output Short-Circuit CurrentTyp ±35 mA, Max ±60 mA @ VOUT = 0V
Receiver Input Voltage Range-25 V to +25 V
Receiver Input Threshold LOWMin 0.6 V, Typ 1.2 V @ Vcc = 3.3V; Min 0.8 V, Typ 1.5 V @ Vcc = 5.0V
Receiver Input Threshold HIGHTyp 1.5 V, Max 2.4 V @ Vcc = 3.3V; Typ 1.8 V, Max 2.4 V @ Vcc = 5.0V
Receiver Propagation DelayTyp 0.15 μs (tPHL, tPLH) @ CL = 150pF
ESD Tolerance (HBM)+15 kV Human Body Model
ESD Tolerance (IEC61000-4-2 Air)+15 kV IEC61000-4-2 Air Discharge
ESD Tolerance (IEC61000-4-2 Contact)+8 kV IEC61000-4-2 Contact Discharge
External Components4 Capacitors
Auto On-Line CircuitryYes
All parameters (16)ExpandCollapse
Power
Voltage - Supply3V ~ 5.5V
Environment and package
Mounting TypeSurface Mount
Operating Temperature-40°C ~ 85°C
PackageTube
Package / Case28-TSSOP (0.173", 4.40mm Width)
Supplier Device Package28-TSSOP
Other
Base Product NumberSP3238
Data Rate250kbps
DuplexFull
MfrMaxLinear, Inc.
Number of Drivers/Receivers5/3
Product StatusActive
ProtocolRS232
Receiver Hysteresis500 mV
Series-
TypeTransceiver

Pinout and package

Figure 4. SP3238E Pinout Confi…
Figure 4. SP3238E Pinout Confi…
Package: 28 Pin TSSOP
PinNameFunctionSource
c1+Positive terminal of the symmetrical charge-pump capacitor C1
c1-Negative terminal of the symmetrical charge-pump capacitor C1
c2+Positive terminal of the symmetrical charge-pump capacitor C2
c2-Negative terminal of the symmetrical charge-pump capacitor C2
gndGround
onlineApply logic HIGH to override AUTO ON-LINE circuitry keeping drivers active (SHUTDOWN must also be logic HIGH)
r1inRS-232receiver input
r1outTTL/CMOSreceiver output
r2inRS-232receiver input
r2outTTL/CMOSreceiver output
r3inRS-232receiver input
r3outTTL/CMOSreceiver output
shutdownApply logic LOW to shut down drivers and charge pump. This overrides all AUTO ON-LINE circuitry and ONLINE
statusTTL/CMOSOutput indicating if a RS-232 signal is present on any receiver input
t1inTTL/CMOSdriver input
t1outRS-232Driver Output
t2inTTL/CMOSdriver input
t2outRS-232Driver Output
t3inTTL/CMOSdriver input
t3outRS-232Driver Output
t4inTTL/CMOSdriver input
t4outRS-232Driver Output
t5inTTL/CMOSdriver input
t5outRS-232Driver Output
v+Regulated +5.5V output generated by the charge pump
v-Regulated -5.5V output generated by the charge pump
vcc+3.0V to +5.5V supply voltage

Documents

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.