Alps AlpineJapan
SKRV Series SKRVAAE010 Directional resolution : 4-direction ･ Function : Center-push ･ Dimensions (W×D×H) : 6.45×6.4×4mm ･ Rating (max.) : 10mA 5V DC
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Voltage proof | 100V AC for 1 minute |
| AC and DC characteristics | |
| Directional resolution | 4方向 |
| Environment and package | |
| 1 case / export packing | 12,000 |
| 1 case / Japan | 12,000 |
| Dimensions (W×D×H) | 6.45×6.4×4mm |
| Export package measurements (mm) | 401×401×214 |
| Number of packages (pcs.) | 1 reel 1,500 1 case / Japan 12,000 1 case / export packing 12,000 |
| Operating temperature range | -20℃ to +70℃ |
| Tip temperature | 350±5℃ |
| Other | |
| 1 reel | 1,500 |
| 4-direction | 1.2N |
| Actuator strength | Operating direction 29.4N |
| Center push | 2.4N |
| Cold | -30℃ 96h |
| Damp heat | 60℃, 90 to 95%RH 96h |
| Directional operating force | 1.2±0.6N |
| Discontinued | The product is no longer produced or sold. |
| Dry heat | 80℃ 96h |
| Durability | Operating life Center push 200,000 cycles |
| Electrical performance | Directional resolution 4方向 Insulation resistance 100MΩ min. 100V DC Voltage proof 100V AC for 1 minute |
| Environmental performance | Cold -30℃ 96h Dry heat 80℃ 96h Damp heat 60℃, 90 to 95%RH 96h |
| Export | 1,500 |
| Guide bosses | Without |
| Initial contact resistance | 500mΩ max. |
| Insulation resistance | 100MΩ min. 100V DC |
| Japan | 1,500 |
| Mechanical performance | Directional operating force 1.2±0.6N Push operating force 2.4±0.69N Actuator strength Operating direction 29.4N |
| Minimum order unit(pcs.) | Japan 1,500 Export 1,500 |
| No. of solders | 1 time |
| Not Recommended for New Designs | It is currently produced to support customers using it for already existing designs. Please do not use the product for new designs. |
| Number of operating shafts | Single-shaft |
| Operating direction | 29.4N |
| Operating force | 4-direction 1.2N Center push 2.4N |
| Operating life | Center push 200,000 cycles |
| Operating life (5mA 5V DC) | 200,000 cycles for each direction |
| Push operating force | 2.4±0.69N |
| Ratings (max.)/(min.) (Resistive load) | 50mA 12V DC/10μA 1V DC |
| Semi-Standard | The product is a semi-custom or optional product. It is mass-produced and may be used for new designs. |
| Shaft material | Resin |
| Soldering time | 3s max. |
| Standard | The product is mass-produced and recommended for new designs. |
| Tape width (mm) | 16 |
| Travel | 4-direction 0.25mm Center push 0.15mm |
| Type | Surface mount |
| Under Development | The product is in the development stage and not yet mass-produced. |
Documents
No documents are linked to this part yet.