Analog Devices Inc.United States
IC REG BUCK ADJ 3A DL 28QFN
LTC3633EUFD#TRPBF is a dual-channel 3A, 15V monolithic synchronous step-down regulator in a 28-lead QFN package, featuring a 3.6V to 15V input range, adjustable 500kHz to 4MHz switching frequency, 0.6V reference, and a low-power 2.5V linear regulator.Checked against the datasheet
All alternatives
View full report6 alternatives on file. Sign in to view them.
Technical parameters
Key specs
Input voltage3.6 ~ 15 V
Output voltage600 mV
Output current3 AMax
Switching frequency500 kHz ~ 4 MHz
Datasheet-verified parameters
22 items| Parameter | Value and test conditions | Source |
|---|---|---|
| Input Voltage Range | 3.6V to 15V | |
| Output Voltage | 0.6V Reference Allows Low Output Voltages | |
| Output Current | 3A per Channel | |
| Switching Frequency | 500kHz to 4MHz | |
| Package | 28-Lead (4mm × 5mm) Plastic QFN | |
| Operating Temperature Range | -40°C to 125°C |
All parameters (21)
| Power | |
|---|---|
| Current - Output | 3A |
| Voltage - Input (Max) | 15V |
| Voltage - Input (Min) | 3.6V |
| Voltage - Output (Max) | 14.7V |
| Voltage - Output (Min/Fixed) | 0.6V |
| AC and DC characteristics | |
| Frequency - Switching | 500kHz ~ 4MHz |
| Environment and package | |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C~125°C(TJ) |
| Package | Tape & Reel (TR); Cut Tape (CT); Digi-Reel® |
| Package / Case | 28-WFQFN Exposed Pad |
| Supplier Device Package | 28-QFN (4x5) |
| Other | |
| Base Product Number | LTC3633 |
| Function | Step-Down |
| Mfr | Analog Devices Inc. |
| Number of Outputs | 2 |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Product Status | Active |
| Series | - |
| Synchronous Rectifier | Yes |
| Topology | Buck |
Pinout and package
UFD PACKAGE 28-LEAD (4mm × 5mm…
| Pin | Name | Function | Source |
|---|---|---|---|
| 1 | PGOOD1: Channel 1 Open-Drain Power Good Output Pin | ||
| 2 | PHMODE: Phase Select Input | ||
| 3 | VIN1: Channel 1 Input Voltage Pin | ||
| 4 | MODE/SYNC: Mode Select/Synchronization Pin | ||
| 5 | RT: Switching Frequency Set Pin | ||
| 6 | RUN2: Channel 2 Run Control Pin | ||
| 7 | SGND: Signal Ground Pin | ||
| 8 | PGOOD2: Channel 2 Open-Drain Power Good Output Pin | ||
| 9 | VIN2: Channel 2 Input Voltage Pin | ||
| 10 | VIN2: Channel 2 Input Voltage Pin | ||
| 11 | VFB2: Channel 2 Output Feedback Voltage Pin | ||
| 12 | TRACKSS2: Channel 2 Output Tracking and Soft-Start Input Pin | ||
| 13 | ITH2: Channel 2 Current Sense/Compensation Pin | ||
| 14 | VON2: Channel 2 Top MOSFET Gate Drive Pin | ||
| 15 | SW2: Channel 2 Switch Node Pin | ||
| 16 | SW2: Channel 2 Switch Node Pin | ||
| 17 | BOOST2: Channel 2 Bootstrap Capacitor Pin | ||
| 18 | V2P5: 2.5V Regulator Output | ||
| 19 | INTVCC: Internal 3.3V Regulator Output | ||
| 20 | BOOST1: Channel 1 Bootstrap Capacitor Pin | ||
| 21 | VIN1: Channel 1 Input Voltage Pin | ||
| 22 | VIN1: Channel 1 Input Voltage Pin | ||
| 23 | SW1: Channel 1 Switch Node Pin | ||
| 24 | SW1: Channel 1 Switch Node Pin | ||
| 25 | VON1: Channel 1 Top MOSFET Gate Drive Pin | ||
| 26 | ITH1: Channel 1 Current Sense/Compensation Pin | ||
| 27 | TRACKSS1: Channel 1 Output Tracking and Soft-Start Input Pin | ||
| 28 | VFB1: Channel 1 Output Feedback Voltage Pin | ||
| 29 | PGND: Power Ground Pin (Exposed Pad) |
Documents
Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.