LMH0302SQE/NOPB
Texas InstrumentsUnited States

LMH0302SQE/NOPB

ActiveVideo ProcessingWQFN

IC VIDEO DRIVER 16WQFN

LMH0302 is a 3-Gbps HD/SD SDI cable driver supporting ST 424/292/259 standards, single 3.3V supply, 16-pin WQFN package, industrial temperature range.Checked against the datasheet

See alternativesAsk AI FAEDatasheet PDF

All alternatives

View full report

2 alternatives on file. Sign in to view them.

Technical parameters

Datasheet-verified parameters

25 items
ParameterValue and test conditionsSource
PackageWQFN (16), 4.00 mm × 4.00 mm
Operating Temperature-40 to 85 °C
GradeIndustrial
RoHSYes
Recommended Supply Voltage3.3 V
Absolute Maximum Supply VoltageMin: -0.5 V, Max: 3.6 V
Maximum Input Data Rate2970 Mbps
Input Voltage SwingMin: 100 mVp-p, Max: 2200 mVp-p
Output Voltage SwingMin: 720 mVp-p, Typ: 800 mVp-p, Max: 880 mVp-p (Single-ended, 75-Ω load, RREF=750Ω 1%)
Supply Current (SD Mode, Enabled)Typ: 50 mA, Max: 59 mA (SD/HD=0, SDO/SDO enabled)
Supply Current (HD Mode, Enabled)Typ: 38 mA, Max: 48 mA (SD/HD=1, SDO/SDO enabled)
Typical Power Consumption (SD Mode)125 mW
Typical Power Consumption (HD Mode)165 mW
Output Rise/Fall Time (SD/HD=0)Typ: 90 ps, Max: 130 ps (20% - 80%)
Output Rise/Fall Time (SD/HD=1)Min: 400 ps, Max: 800 ps (20% - 80%)
Additive Jitter (2.97 Gbps)Typ: 20 ps p-p
Duty Cycle Distortion (2.97 Gbps, SD/HD=0)Max: 27 ps
Output Return Loss (5 MHz - 1.5 GHz)Min: 15 dB
Junction TemperatureMax: 125 °C
Storage TemperatureMin: -65 °C, Max: 150 °C
ESD (HBM)±4500 V
ESD (CDM)±2000 V
Thermal Resistance (Junction-to-Ambient)47.8 °C/W
Input Voltage High LevelMin: 2 V (SD/HD, ENABLE)
Input Voltage Low LevelMax: 0.8 V (SD/HD, ENABLE)
All parameters (13)ExpandCollapse
Power
Voltage - Supply3.13V ~ 3.46V
Environment and package
Mounting TypeSurface Mount
PackageTape & Reel (TR); Cut Tape (CT); Digi-Reel®
Package / Case16-WQFN Exposed Pad
Supplier Device Package16-WQFN (4x4)
Other
ApplicationsProfessional Video
Base Product NumberLMH0302
Control InterfaceSerial
FunctionDriver
MfrTexas Instruments
Product StatusActive
Series-
StandardsDVB-ASI, SMPTE

Pinout and package

PackageWQFN (16), 4.00 mm × 4.00 mm

PinNameFunctionSource
1SDI: Serial data true input
2SDI: Serial data complement input
3VEE: Negative power supply (ground)
4RREF: Output driver level control
5NC: No connect
6ENABLE: Output driver enable
7NC: No connect
8NC: No connect
9VCC: Positive power supply (3.3 V)
10SD/HD: Output slew rate control
11SDO: Serial data complement output
12SDO: Serial data true output
13NC: No connect
14NC: No connect
15NC: No connect
16NC: No connect
EPEP: Exposed pad (ground)

Documents

DatasheetDatasheet · 520.8 KB · 2026-11-02
Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.