All alternatives

View full report

Technical parameters

Power
No-load supply currentI 0 | < 20 mA
Operating voltageU B | 10 ... 30 V DC
Switching currentmax. 100 mA , resistive load
Switching voltagemax. 30 V DC
Voltage dropU d | ≤ 1.5 V DC
AC and DC characteristics
Ripplemax. 10 %
Switching frequencyf | 1000 Hz
Environment and package
Ambient temperature-30 ... 60 °C (-22 ... 140 °F)
Height31 mm
Height 31 mm Width 11 mm Depth 20 mmHeight | 31 mm | Width | 11 mm | Depth | 20 mm
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Other
Ambient light limitEN 60947-5-2
Cable length1.5 m
CCC approvalCCC approval / marking not required for products rated ≤36 V
Connection1500 mm fixed cable with 4-pin, M8 x 1 connector
Degree of protectionIP67
Depth20 mm
Diagnostic Coverage (DC)0 %
Diameter of the light spotapprox. 200 mm at a distance of 3 m
Effective detection range0 ... 2.7 m
Function indicatorLED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted
HousingPC (Polycarbonate)
Housing PC (Polycarbonate) Optical face PMMAHousing | PC (Polycarbonate) | Optical face | PMMA
Light sourceLED
Light typemodulated visible red light
Massapprox. 50 g
Mission Time (T M )20 a
MTTF d860 a
Opening angleapprox. 4 °
Operation indicatorLED green: power on
Optical facefrontal
Polarization filteryes
Product standardEN 60947-5-2
Reference targetH50 reflector
Reflector distance0.02 ... 2.7 m ( 0.02 ... 1 m on OFR-100/100 optical reflective film )
Response time0.5 ms
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching typelight-on
Threshold detection range3 m
Tightening torque, fastening screws0.6 Nm
UL approvalcULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
Width11 mm

Documents

No documents are linked to this part yet.