All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Current consumption | ≤ 22 mA |
| No-load supply current | I 0 | ≤ 15 mA |
| Off-state current | I r | ≤ 10 µA |
| Operating current | I L | ≤ 200 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Voltage drop | U d | ≤ 2 V |
| AC and DC characteristics | |
| Switching frequency | f | 80 Hz |
| Environment and package | |
| Ambient temperature | -10 ... 70 °C (14 ... 158 °F) |
| Height | 5.5 mm |
| Height 5.5 mm Width 7.9 mm Length 30 mm | Height | 5.5 mm | Width | 7.9 mm | Length | 30 mm |
| Other | |
| Actuating element | Ferrous targets |
| Assured operating distance | s a | 0 ... 1.62 mm |
| Bending radius | > 12 x cable diameter |
| Cable diameter | 3 mm - 0.2 mm |
| Cable diameter 3 mm - 0.2 mm Bending radius > 12 x cable diameter Material PUR Color black Number of cores 3 Core cross section 0.14 mm 2 Length L 150 mm | Cable diameter | 3 mm - 0.2 mm | Bending radius | > 12 x cable diameter | Material | PUR | Color | black | Number of cores | 3 | Core cross section | 0.14 mm 2 | Length | L | 150 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Color | black |
| Connection type | fixed cable with plug |
| Core cross section | 0.14 mm 2 |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Hysteresis | H | typ. 5 % |
| Installation | flush Note: Sensor can be recessed 0.5 mm in steel with no effect on the sensing field. |
| Length | L | 150 mm |
| Material | PUR |
| Mission Time (T M ) | 20 a |
| MTTF d | 828 a |
| Number of cores | 3 |
| Number of pins | 3 |
| Operation indicator | Dual LED green: power yellow: Output |
| Output type | NPN |
| Rated operating distance | s n | 2 mm |
| Reduction factor r 304 | 0.6 - 0.8 |
| Reduction factor r Al | 0 |
| Reduction factor r Brass | 0 |
| Reduction factor r Cu | 0 |
| Reverse polarity protection | reverse polarity protected |
| Shock resistance | 30 g 11 ms 3 planes |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Switching function | Normally open (NO) |
| Threading | M12 x 1 |
| Threading M12 x 1 Tightening torque ≤ 0.6 Nm Number of pins 3 | Threading | M12 x 1 | Tightening torque | ≤ 0.6 Nm | Number of pins | 3 |
| Tightening torque | ≤ 0.6 Nm |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA |
| Width | 7.9 mm |
Documents
No documents are linked to this part yet.