All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 25 mA |
| Off-state current | I r | 0 ... 0.5 mA typ. 0.01 mA |
| Operating current | I L | 0 ... 200 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Operating voltage indicator | LED, green |
| Rated impulse withstand voltage | U imp | 800 V |
| Rated insulation voltage | U i | 60 V |
| Rated insulation voltage U i 60 V Rated impulse withstand voltage U imp 800 V | Rated insulation voltage | U i | 60 V | Rated impulse withstand voltage | U imp | 800 V |
| Voltage drop | U d | ≤ 2.5 V |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 440 Hz |
| Time delay before availability | t v | 15 ms |
| Environment and package | |
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Height | 40 mm |
| Height 40 mm Width 40 mm Length 67 mm | Height | 40 mm | Width | 40 mm | Length | 67 mm |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Other | |
| Actual operating distance | s r | 18 ... 22 mm typ. 20 mm |
| Alternating magnetic field | B | 200 mT |
| Assured operating distance | s a | 0 ... 16.2 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection type | Connector plug |
| Constant magnetic field | B | 200 mT |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Housing material | GD-ZnAl4Cu1, coated mounting flange PA6-GF35 |
| Hysteresis | H | 3 ... 15 % |
| Installation | flush |
| Length | 67 mm |
| Mass | 180 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 1123 a |
| Number of pins | 4 |
| Output polarity | DC |
| Output type | PNP |
| Protection class | II |
| Rated operating distance | s n | 20 mm |
| Reduction factor r 304 | 1 |
| Reduction factor r Al | 1 |
| Reduction factor r Cu | 1 |
| Reduction factor r St37 | 1 |
| Reverse polarity protection | reverse polarity protected |
| Sensing face | PA 6 Grivory GVN-35H |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Switching function | complementary |
| Switching state indicator | LED, yellow |
| Threading | M12 x 1 |
| Threading M12 x 1 Number of pins 4 | Threading | M12 x 1 | Number of pins | 4 |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA |
| Width | 40 mm |
Documents
No documents are linked to this part yet.