All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 15 mA |
| Off-state current | I r | 0 ... 0.5 mA |
| Operating current | I L | 1 ... 30 mA per output |
| Operating voltage | U B | 18 ... 30 V |
| Rated insulation voltage | U BIS | 30 V |
| Rated operating voltage | U e | 24 V |
| Voltage drop | U d | ≤ 3 V at I L (sum of all outputs) max. 50 mA |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 30 Hz |
| Time delay before availability | t v | ≤ 300 ms |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Other | |
| Actuating element | Reference target according EN IEC 60947-5-2 (FE360 - ST37K) 24 mm x 24 mm x 1 mm |
| Altitude | ≤ 2000 m above MSL |
| Assured operating distance | s a | 0 ... 6.48 mm |
| Assured release distance of a PDDB | S ar | 12 mm |
| Category | Cat. 2 |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection type | Connector plug |
| Degree of protection | IP68 / IP69 |
| Diagnostic Coverage (DC) | min. 60 % |
| Diameter | 18 mm |
| Error indicator | LED, red |
| Housing material | brass, nickel-plated |
| Hysteresis | H | typ. 5% |
| Installation | non-flush |
| Length | 65 mm |
| Length 65 mm Diameter 18 mm | Length | 65 mm | Diameter | 18 mm |
| Mass | 45 g |
| Mission Time (T M ) | 20 a |
| MTTF d | > 7500 a |
| Number of pins | 4 |
| Output polarity | DC |
| Output type | PNP |
| Overload resistance | yes |
| Performance level (PL) | PL d |
| Rated operating distance | s n | 8 mm |
| Reduction factor r 304 | 0.85 |
| Reduction factor r Al | 0.5 |
| Reduction factor r Brass | 0.55 |
| Reduction factor r Cu | 0.5 |
| Reverse polarity protection | reverse polarity protected |
| Safety Integrity Level (SIL) | SIL 2 |
| Scope of delivery | 2 self locking nuts in scope of delivery |
| Sensing face | PBT |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2:2007 EN IEC 60947-5-3:2013 EN ISO 13849-1:2015 EN IEC 61508:2010 EN 62061:2005+AC:2010+A1:2013+A2:2015 compatible with EN ISO 61131-2:2007 Typ 1, 2, 3 |
| Switching function | 2 x normally open (NO) |
| Switching state indicator | LED, yellow |
| Threading | M12 x 1 |
| Threading M12 x 1 Number of pins 4 | Threading | M12 x 1 | Number of pins | 4 |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 24 V DC Output Switching Current: 2 x 30 mA |
Documents
No documents are linked to this part yet.