All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 40 mA |
| Operating current | I L | ≤ 100 mA / Output |
| Operating voltage | U B | 12 ... 30 V DC (13 ... 30 V when analog voltage output is parameterized) |
| Operating voltage indicator | LED green |
| Voltage drop | ≤ 3 V |
| AC and DC characteristics | |
| Repeat accuracy | R | ± 0.1 mm |
| Resolution | 50 µm |
| Environment and package | |
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Height | 40 mm |
| Height 40 mm Width 23 mm Length 95.1 mm | Height | 40 mm | Width | 23 mm | Length | 95.1 mm |
| Temperature drift | ± 0.5 mm (-25 °C ... 70 °C) |
| Other | |
| Compatible master port type | A |
| Connection type | 5-pin, M12 x 1 connector |
| Degree of protection | IP67 / IP69K |
| Device ID | 0x200303 (2097923) |
| Device profile | Smart Sensor |
| Diagnostic Coverage (DC) | 0 % |
| Housing | PBT, stainless steel 1.4571 , brass, nickel-plated |
| Housing PBT, stainless steel 1.4571 , brass, nickel-plated Target mild steel, e. g. 1.0037, SR235JR (formerly St37-2) | Housing | PBT, stainless steel 1.4571 , brass, nickel-plated | Target | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) |
| Interface type | IO-Link (via C/Q = Pin 4) |
| IO-Link revision | 1.1 |
| LED S1 | switching state Switching output 1 |
| LED S2 | switching state Switching output 2 |
| LED S3 | Damping element in the configured analog measuring range |
| LED STATUS | Status display LED, green/red (Power on, communication/error, missing damping element) |
| Length | 95.1 mm |
| Linearity error | within measuring range: ± 0.8 mm within linearity range: ± 0.4 mm |
| Linearity range | 1 ... 79 mm |
| Load resistor | current output: ≤ 400 Ω voltage output: ≥ 1000 Ω |
| Marine approval | DNVGL TAA00001V2 |
| Mass | 83 g |
| Measuring range | 0 ... 80 mm |
| Min. cycle time | 2.3 ms |
| Mission Time (T M ) | 20 a |
| MTTF d | 311 a |
| Object distance | 0.5 ... 3 mm , recommended: 1.5 mm |
| Output type | 2 push-pull outputs (can be parameterized), short-circuit-proof, reverse polarity protection, surge-proof |
| Process data width | Process data input: 16 Bit Process data output: none |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| SIO mode support | yes |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 EN 60947-5-7:2003 EN61131-9:2013 IEC 60947-5-7:2003 IEC 61131-9:2013 |
| Switching element function | Analog current or voltage output, programmable 2 switch outputs, programmable |
| Switching hysteresis | 0.2 mm |
| Switching window | ± 1 mm |
| Target | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) |
| Transfer rate | COM2 (38.4 kBit/s) |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC |
| Value range | 0000h ... 6400h |
| Width | 23 mm |
Documents
No documents are linked to this part yet.