Pepperl+Fuchs, Inc.Germany
8929
ActivePrint mark contrast sensor, 800 mm detection range, red laser light, laser class 2, light/dark on, sensitivity adjuster, NPN output, PNP output, M12 plug
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 55 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 200 mA |
| Switching voltage | max. 30 V DC |
| AC and DC characteristics | |
| Ripple | 10 % |
| Switching frequency | f | 16.5 kHz |
| Environment and package | |
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) |
| Height | 85.6 mm |
| Height 85.6 mm Width 33 mm Depth 60.8 mm | Height | 85.6 mm | Width | 33 mm | Depth | 60.8 mm |
| Storage temperature | -20 ... 75 °C (-4 ... 167 °F) |
| Other | |
| Beam divergence | < 1.5 mrad |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | 5-pin, M12 x 1 connector |
| Continuous light | 40000 Lux |
| Continuous light 40000 Lux | Continuous light | 40000 Lux |
| Control elements | Light-on/dark-on changeover switch, sensitivity adjuster |
| Degree of protection | IP67 |
| Depth | 60.8 mm |
| Detection range | 3 ... 800 mm |
| Diagnostic Coverage (DC) | 0 % |
| FDA approval | IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019. |
| Function indicator | LED yellow: lights up if receiver is lit (light on), lights up if receiver is not lit (dark on) |
| Housing | PC (glass-fiber-reinforced Makrolon) |
| Housing PC (glass-fiber-reinforced Makrolon) Optical face glass | Housing | PC (glass-fiber-reinforced Makrolon) | Optical face | glass |
| Laser class | 2 |
| Laser safety | IEC 60825-1:2014 |
| Light source | laser diode |
| Light spot representation | approx. 2 mm at a distance of 800 mm |
| Light type | modulated visible red light |
| Mass | 200 g |
| max. pulse energy | 2.1 nJ |
| Mission Time (T M ) | 10 a |
| MTTF d | 550 a |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Optical face | glass |
| Product standard | EN 60947-5-2 |
| Pulse length | 1.5 µs |
| Repetition rate | 108.7 kHz |
| Response time | 30 µs |
| Sensor range | 800 mm |
| Shock and impact resistance | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions |
| Signal output | 1 PNP and 1 NPN short-circuit protected, open collector, synchronized-switching |
| Switching type | light/dark on switchable |
| Test input | emitter deactivation with +Ub |
| UL approval | cULus Listed , Class 2 power source |
| Vibration resistance | IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions |
| Wave length | 650 nm |
| Width | 33 mm |
Documents
No documents are linked to this part yet.