85053

Active

Triangulation sensor with background suppression for standard applications, flat design, space-saving M2 mounting, 30 mm sensing range, red light, light on, PNP output, with 0.2 m fixed cable and M8 plug, 4-pin

See alternatives Ask AI FAE

All alternatives

View full report

Technical parameters

Power
No-load supply current	I 0 \| < 10 mA
Operating voltage	U B \| 12 ... 24 V
Switching current	max. 50 mA , resistive load
Switching voltage	max. 30 V DC
Voltage drop	U d \| ≤ 1.5 V DC
AC and DC characteristics
Switching frequency	f \| approx. 2 kHz
Environment and package
Ambient temperature	-10 ... 60 °C (14 ... 140 °F)
Height	25.5 mm
Height 25.5 mm Width 12 mm Depth 4.1 mm	Height \| 25.5 mm \| Width \| 12 mm \| Depth \| 4.1 mm
Object size	typ. starts from 0.05 mm @ 20 mm
Storage temperature	-20 ... 70 °C (-4 ... 158 °F)
Other
Ambient light limit	EN 60947-5-2 : 25000 Lux
Angle deviation	approx. 0.5 °
Beam divergence	> 5 mrad
Black-white difference (6 %/90 %)	< 20 % at 30 mm
Cable	PUR
Cable length	200 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection	200 mm fixed cable with 4-pin, M8x1 connector
Degree of protection	IP67
Depth	4.1 mm
Detection range	3 ... 30 mm
Diagnostic Coverage (DC)	0 %
Diameter of the light spot	1.5 mm +/- 1 mm at a distance of 30 mm
FDA approval	IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.
Function indicator	LED yellow ON: lights when object is detected
Housing	PC (Polycarbonate) and Stainless steel
Housing PC (Polycarbonate) and Stainless steel Optical face PMMA Cable PUR	Housing \| PC (Polycarbonate) and Stainless steel \| Optical face \| PMMA \| Cable \| PUR
Laser class	1
Laser safety	IEC 60825-1:2014
Light source	LASER LIGHT
Light type	modulated visible red light , 680 nm
Mass	approx. 10 g
max. pulse energy	8 nJ
Mission Time (T M )	10 a
MTTF d	800 a
Note	LASER LIGHT , DO NOT STARE INTO BEAM
Opening angle	approx. 1 °
Operation indicator	LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
Optical face	frontal
Product standard	EN 60947-5-2
Protection class	III
Pulse length	approx. 3 µs
Reference target	standard white, 100 mm x 100 mm
Repetition rate	approx. 16.6 kHz
Response time	250 µs
Signal output	1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching type	NO contact / light-on
Tightening torque, fastening screws	0.25 Nm
UL approval	E87056 , cULus Recognized, Class 2 Power Source
Wave length	680 nm
Width	12 mm

Documents

No documents are linked to this part yet.