All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Current consumption | 120 mA |
| Current loading capacity | Max. 2 x 16 A per module (Loop-through current via L-coded power supply) Total current: max. 9 A per module |
| Input current | 5 mA (limited internally) |
| Nominal voltage | 24 V DC |
| Rated operating voltage | U e | 18 ... 30 V |
| Sensor supply | max. 200 mA per port (X1 - X8) |
| Supply | 24 V DC from U S |
| AC and DC characteristics | |
| Noise immunity | EN 61000-6-2:2005 |
| Environment and package | |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Cold start temperature | -40 °C (-40 °F) |
| Height | 200 mm |
| Height 200 mm Width 59.6 mm Length 21 mm | Height | 200 mm | Width | 59.6 mm | Length | 21 mm |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Other | |
| 0 (unattenuated) | > -3 VDC ... 5 VDC |
| 0 (unattenuated) > -3 VDC ... 5 VDC 1 (attenuated) > 11 VDC 30 VDC | 0 (unattenuated) | > -3 VDC ... 5 VDC | 1 (attenuated) | > 11 VDC 30 VDC |
| 1 (attenuated) | > 11 VDC 30 VDC |
| Altitude | 0 ... 2000 m |
| Connection | Power Supply M12, L-coded Fieldbus M12, D-coded Inputs M12, A-coded |
| Construction type | Field housing |
| Contact elements | PA |
| Contacts | CuSn, gold-plated CuNi, gold-plated |
| Contacts CuSn, gold-plated CuNi, gold-plated Housing Diecast zinc Seal FKM | Contacts | CuSn, gold-plated CuNi, gold-plated | Housing | Diecast zinc | Seal | FKM |
| Degree of protection | EN 60529:2000 |
| Directive 2014/30/EU | EN 61000-6-2:2005, EN 61000-6-4:2007+A1:2011 |
| Directive 2014/30/EU EN 61000-6-2:2005, EN 61000-6-4:2007+A1:2011 | Directive 2014/30/EU | EN 61000-6-2:2005, EN 61000-6-4:2007+A1:2011 |
| Emitted interference | EN 61000-6-4:2007+A1:2011 |
| Fusing | Electronic overload and short-circuit protection |
| Housing | Diecast zinc |
| Input filter | 3 ms |
| Input type | 2-, 3-, 4-wire PNP, DC |
| Interface type | Industrial Ethernet |
| LED indication | see manual |
| Length | 21 mm |
| Mass | 500 g |
| Number/Type | 16 Digital inputs (X1 – X8) short-circuit protected |
| Physical | M12, D-coded |
| Pollution degree | 3 |
| Protocol | PROFINET IO with media redundancy protocol (MRP) EtherNet/IP with Device Level Ring (DLR) EtherCAT® |
| Relative humidity | max. 95 % |
| Rotary switch | Setting the fieldbus protocol |
| Seal | FKM |
| Shock and impact resistance | 50 g, 11 ms, all axes |
| Shock resistance | EN 61131-2:2004 |
| Tightening torque, cable gland | 0.6 Nm |
| Tightening torque, fastening screws | 1 Nm |
| Tightening torque of clamping screws | 0.5 Nm |
| Transfer rate | 10/100 Mbps |
| UL File Number | E223772 |
| Vibration resistance | 15 g at 5 - 500 Hz |
| Width | 59.6 mm |
Documents
No documents are linked to this part yet.