All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Operating voltage | U B | 9 ... 30 V DC (with galvanic isolation) |
| Power consumption | P 0 | ≤ 1.2 W |
| AC and DC characteristics | |
| Noise immunity | EN 61000-6-2:2005 |
| Overall resolution | up to 31 Bit |
| Single turn up to 16 Bit Multiturn up to 15 Bit Overall resolution up to 31 Bit | Single turn | up to 16 Bit | Multiturn | up to 15 Bit | Overall resolution | up to 31 Bit |
| Time delay before availability | t v | < 250 ms |
| Environment and package | |
| Operating temperature | cable, movable installation: -5 ... 70 °C (23 ... 158 °F), cable, fixed installation: -30 ... 70 °C (-22 ... 158 °F) connector models: -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Other | |
| Axial | 20 N |
| Axial 20 N Radial 40 N | Axial | 20 N | Radial | 40 N |
| Cable | ∅6 mm, 4 x 2 x 0.14 mm 2 |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation |
| Code course (counting direction) | adjustable |
| Connector | M12 connector, 5 pin |
| Cycle time | ≥ 1 ms |
| Degree of protection | DIN EN 60529, IP65 or IP54 |
| Detection type | magnetic sampling |
| Device type | Absolute rotary encoder |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 36.5 mm |
| Diameter 36.5 mm | Diameter | 36.5 mm |
| Emitted interference | EN 61000-6-4:2007 |
| Flange | Aluminum |
| Housing | nickel-plated steel |
| Housing nickel-plated steel Flange Aluminum Shaft Stainless steel | Housing | nickel-plated steel | Flange | Aluminum | Shaft | Stainless steel |
| Interface type | CANopen |
| L 10 | 40 E-8 revolutions at 20/40 N axial/radial shaft load |
| Linearity error | ≤ ± 0.1 ° |
| Mass | approx. 150 g |
| Mission Time (T M ) | 20 a |
| Moment of inertia | 30 gcm 2 |
| MTTF d | 480 a at 40 °C |
| Multiturn | up to 15 Bit |
| Output code | binary code |
| Radial | 40 N |
| Relative humidity | 98 % , no moisture condensation |
| Rotational speed | max. 12000 min -1 |
| Shaft | Stainless steel |
| Shock resistance | DIN EN 60068-2-27, 200 g , 6 ms |
| Single turn | up to 16 Bit |
| Standard conformity | DSP 406 |
| Starting torque | < 3 Ncm |
| Transfer rate | min. 20 kBit/s , max. 1 MBit/s |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. |
| UL File Number | E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product. |
| Vibration resistance | DIN EN 60068-2-6, 20 g , 10 ... 1000 Hz |
Documents
No documents are linked to this part yet.