Pepperl+Fuchs, Inc.Germany
73761
ActiveMulti-input/output for digital signals, stand-alone device with aluminum housing for field installation
All alternatives
View full reportTechnical parameters
| Environment and package | |
|---|---|
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) hazardous area |
| Design / Mounting | Outside installation |
| Mounting | wall mounting |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Other | |
| Approved for | Ex ib [ia Ga] IIC T4 Gb , Ex ic [ia Ga] IIC T4 Gc , Ex ec [ia Ga] IIC T4 Gc , [Ex ia Ma] I , [Ex ia Da] IIIC , Ex tb [ia Da] IIIC T130 °C Db |
| Approved for Ex ib [ia Ga] IIC T4 Gb , Ex ic [ia Ga] IIC T4 Gc , Ex ec [ia Ga] IIC T4 Gc , [Ex ia Ma] I , [Ex ia Da] IIIC , Ex tb [ia Da] IIIC T130 °C Db | Approved for | Ex ib [ia Ga] IIC T4 Gb , Ex ic [ia Ga] IIC T4 Gc , Ex ec [ia Ga] IIC T4 Gc , [Ex ia Ma] I , [Ex ia Da] IIIC , Ex tb [ia Da] IIIC T130 °C Db |
| Bus | up to 2.5 mm 2 |
| Bus up to 2.5 mm 2 Inputs up to 2.5 mm 2 | Bus | up to 2.5 mm 2 | Inputs | up to 2.5 mm 2 |
| Cable diameter | see table 2 |
| Cable gland | sensor inputs M16, fieldbus M20 |
| Connection type | plug-in terminals , spring terminal and screw terminal |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
| Degree of protection | IEC 60529 |
| Directive 2014/30/EU | EN 61326-1:2013 |
| Directive 2014/30/EU EN 61326-1:2013 | Directive 2014/30/EU | EN 61326-1:2013 |
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-31:2014 |
| Directive 2014/34/EU EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-31:2014 | Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-31:2014 |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Directive 2014/35/EU EN 61010-1:2010 | Directive 2014/35/EU | EN 61010-1:2010 |
| Electromagnetic compatibility | NE 21:2011 |
| Electronic component | Binary multi-input/output R8D0-MIO-Ex12.FF* For technical data on installed electronic component see datasheet. |
| EU-type examination certificate | BVS 16 ATEX E 075 X |
| Fieldbus standard | IEC 61158-2 |
| Fieldbus type | FOUNDATION Fieldbus |
| FM approval | pending |
| Foundation Fieldbus/Field circuit | safe galvanic isolation acc. to EN 60079-11, voltage peak value 375 V |
| Galvanic isolation | EN 60079-11 |
| Housing material | Aluminum |
| IECEx approval | IECEx BVS 16.0051X |
| Inputs | up to 2.5 mm 2 |
| Installation in hazardous area | Zone 1 / Div. 1 |
| Marine approval | pending |
| Marking | II 2 (1) G Ex ib [ia Ga] IIC T4 Gb , [exsign] II 3 (1) G Ex ic [ia Ga] IIC T4 Gc , [exsign] II 3 (1) G Ex ec [ia Ga] IIC T4 Gc , [exsign] I (M1) [Ex ia Ma] I , [exsign] II (1) D [Ex ia Da] IIIC , [exsign] II 2 (1) D Ex tb [ia Da] IIIC T130 °C Db |
| Mass | 1800 g |
| Number of inputs | 12 |
| Relative humidity | ≤ 95 % non-condensing |
| Shock resistance | EN 60068-2-27 |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| Vibration resistance | EN 60068-2-6 |
Documents
No documents are linked to this part yet.