73057

Active

Inductive sensor

All alternatives

Technical parameters

Power
Off-state current	I r \| 120 ... 200 µA typ. 175 µA at 25 °C
Operating current	I L \| 4 ... 100 mA
Operating voltage	U B \| 5 ... 30 V DC
Voltage drop	U d \| ≤ 4.5 V
AC and DC characteristics
Switching frequency	f \| 0 ... 500 Hz
Time delay before availability	t v \| ≤ 100 ms
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Height	20 mm
Height 20 mm Width 52 mm Length 52 mm	Height \| 20 mm \| Width \| 52 mm \| Length \| 52 mm
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Other
Actual operating distance	s r \| 3.6 ... 4.4 mm typ.
Assured operating distance	s a \| 0 ... 3.24 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	Connector plug
Connector housing	metal
Degree of protection	IP67
Housing material	PBT
Hysteresis	H \| typ. 5 %
Installation	flush mountable
Length	52 mm
Mass	49 g
Note	Mounted on mechanical drive
Number of pins	4
Output polarity	DC
Output type	Two-wire with minimum off-state current
Rated operating distance	s n \| 4 mm
Reduction factor r 304	1
Reduction factor r Al	0.6
Reduction factor r Cu	0.45
Reduction factor r St37	1.2
Reverse polarity protection	reverse polarity protected
Sensing face	PC
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	2 x normally open (NO)
Switching state indicator	LED, yellow
Threading	M12 x 1
Threading M12 x 1 Number of pins 4	Threading \| M12 x 1 \| Number of pins \| 4
Tightening torque, fastening screws	M5 x 25 : ≤ 2.7 Nm
UL approval	cULus Listed Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA
Width	52 mm

Documents

No documents are linked to this part yet.