60276

Active

Inductive sensor

All alternatives

Technical parameters

Power
Current	max. 240 mA
Off-state current	I r \| 100 ... 200 µA typ. 160 µA
Operating current	I L \| 4 ... 100 mA
Operating voltage	U B \| 6 ... 30 V
Voltage	max. 32 V DC
Voltage drop	U d \| ≤ 6 V
AC and DC characteristics
Switching frequency	f \| 0 ... 100 Hz
Environment and package
Ambient temperature	-40 ... 75 °C (-40 ... 167 °F)
Height	53 mm
Height 53 mm Width 100 mm Length 106 mm	Height \| 53 mm \| Width \| 100 mm \| Length \| 106 mm
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Other
Assured operating distance	s a \| 0 ... 2.05 mm
Connection (system side)	screw terminal , M20 x 1.5 cable gland
Connection (valve side)	screw terminal , Cable gland M20 x 1.5
Core cross section (system side)	1.5/2.5 mm 2 flexible/rigid
Degree of protection	IP66 / IP68 / IP69
Diagnostic Coverage (DC)	0 %
Housing base	PC
Housing material	rugged, translucent polycarbonate (PC) optimised for outdoor use
Hysteresis	H \| typ. 0.5 mm
Installation	for non-flush mounting
Length	106 mm
Mission Time (T M )	20 a
MTTF d	684 a
Output polarity	DC
Output type	Two-wire with minimum off-state current
Rated operating distance	s n \| 2.5 mm
Reverse polarity protection	reverse polarity tolerant
Short-circuit protection	no
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	2 x normally open (NO)
Switching state indicator	LED, yellow
Tightening torque, cable gland	M20 x 1.5 ; max. 7 Nm
Tightening torque, fastening screws	≤ 5 Nm
Tightening torque, housing screws	1.5 Nm
Tightening torque, stopping plug	1 Nm
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA
Valve status indicator	LED, yellow
Width	100 mm

Documents

No documents are linked to this part yet.