58999

Active

Inductive sensor

All alternatives

Technical parameters

Power
Inductive overvoltage protection	yes
No-load supply current	I 0 \| ≤ 7 mA
Off-state current	I r \| 0 ... 0.5 mA typ. 6 µA at 25 °C
Operating current	I L \| 0 ... 200 mA
Operating voltage	U B \| 5 ... 60 V
Rated insulation voltage	U BIS \| 60 V
Voltage drop	U d \| ≤ 2 V
AC and DC characteristics
Switching frequency	f \| 0 ... 1500 Hz
Time delay before availability	t v \| ≤ 220 ms
Environment and package
Ambient temperature	-40 ... 85 °C (-40 ... 185 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Other
Assured operating distance	s a \| 0 ... 9.72 mm
Bending radius	> 6 x cable diameter
Cable diameter	6 mm ± 0.2 mm
CCC approval	Certified by China Compulsory Certification (CCC)
Color	black
Connection type	cable
Core cross section	0.75 mm 2
CSA approval	cCSAus Listed, General Purpose, Class 2 Power Source
Degree of protection	IP68 / IP69K
Diagnostic Coverage (DC)	0 %
Diameter	18 mm
E1 Type approval	10R-06
Housing material	PBT
Hysteresis	H \| type 5 %
Installation	non-flush
Length	L \| 2 m
Length 58 mm Diameter 18 mm	Length \| 58 mm \| Diameter \| 18 mm
Mass	120 g
Material	PUR
Mission Time (T M )	20 a
MTTF d	846 a
Number of cores	3
Output polarity	DC
Output type	NPN
Rated operating distance	s n \| 12 mm
Reduction factor r 304	0.7
Reduction factor r Al	0.5
Reduction factor r Brass	0.5
Reduction factor r Cu	0.45
Reverse polarity protection	reverse polarity protected
Sensing face	PBT
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Surge suppression	yes
Switching function	Normally open (NO)
Switching state indicator	LED, yellow
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 200 mA
Wire end ferrules	yes

Documents

No documents are linked to this part yet.