57261

Active

Inductive sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 15 mA
Off-state current	I r \| 0 ... 0.5 mA typ. 0.1 µA at 25 °C
Operating current	I L \| 0 ... 200 mA
Operating voltage	U B \| 10 ... 30 V
Voltage drop	U d \| ≤ 2.5 V
AC and DC characteristics
Switching frequency	f \| 0 ... 2500 Hz
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Other
Alternating magnetic field	B \| 200 mT
Assured operating distance	s a \| 0 ... 4.86 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	Connector plug
Constant magnetic field	B \| 200 mT
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Diameter	8 mm
Housing material	Stainless steel 1.4305 / AISI 303
Hysteresis	H \| typ. 5 %
Installation	non-flush
Length	40 mm
Length 40 mm Diameter 8 mm	Length \| 40 mm \| Diameter \| 8 mm
Mission Time (T M )	20 a
MTTF d	1010.5 a
Number of pins	3
Output polarity	DC
Output type	PNP
Rated operating distance	s n \| 6 mm
Reduction factor r 304	1
Reduction factor r Al	1
Reduction factor r Cu	1
Reduction factor r St37	1
Reverse polarity protection	reverse polarity protected
Sensing face	LCP , green
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Switching state indicator	Multihole-LED, yellow
Threading	M8 x 1
Threading M8 x 1 Number of pins 3	Threading \| M8 x 1 \| Number of pins \| 3
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA

Documents

No documents are linked to this part yet.