Pepperl+Fuchs, Inc.Germany
57020
ActiveDiffuse mode sensor with special light spots for detecting PCBs, background suppression, miniature design, 100 mm detection range, red light, light on, NPN outputs, M8 plug
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | < 15 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 1.5 V DC |
| AC and DC characteristics | |
| Ripple | max. 10 % |
| Switching frequency | f | 500 Hz |
| Environment and package | |
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) |
| Height | 31 mm |
| Height 31 mm Width 11 mm Depth 20 mm | Height | 31 mm | Width | 11 mm | Depth | 20 mm |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Other | |
| Adjustment range | 25 ... 100 mm |
| Ambient light limit | EN 60947-5-2:2007+A1:2012 |
| Black-white difference (6 %/90 %) | < 20 % |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | Connector M8 x 1 , 4-pin |
| Control elements | Sensing range adjuster |
| Degree of protection | IP67 |
| Depth | 20 mm |
| Detection range | 20 ... 100 mm |
| Detection range max. | 25 ... 100 mm |
| Detection range min. | 10 ... 25 mm |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | 3 light spots, spotsize 4 mm at a distance of 50 mm, spots are 8 mm apart; spotsize 2.5 mm at a distance of 80 mm, spots are 12 mm apart; spotsize 4 mm at a distance of 100 mm, spots are 15 mm apart (outer spot to outer spot) |
| Function indicator | LED yellow: lights when object is detected , flashes when in adjustment mode |
| Housing | PC (Polycarbonate) |
| Housing PC (Polycarbonate) Optical face PMMA | Housing | PC (Polycarbonate) | Optical face | PMMA |
| Light source | LED |
| Light type | modulated visible red light |
| Mass | approx. 10 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 1100 a |
| Operation indicator | LED green: power on |
| Optical face | frontal |
| Polarization filter | no |
| Product standard | EN 60947-5-2 |
| Reference target | standard white, 100 mm x 100 mm |
| Response time | 1 ms |
| Signal output | 2 NPN outputs, independent short-circuit protected , reverse polarity protected , open collector transistor |
| Switching type | The switching type of the sensor is adjustable. The default setting is: light-on |
| Tightening torque, fastening screws | 0.6 Nm |
| UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| Width | 11 mm |
Documents
No documents are linked to this part yet.