All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 50 mA |
| Off-state current | ≤ 10 µA |
| Operating current | I L | 300 mA , short-circuit/overload protected |
| Operating voltage | U B | 20 ... 30 V DC (including ripple) |
| Rated operating voltage | U e | 24 V DC |
| Voltage drop | ≤ 3 V |
| AC and DC characteristics | |
| 0 Level ≤ 3 V 1 Level ≥ 15 V Input impedance typ. 900 Ω Number of sensors max. 10 | 0 Level | ≤ 3 V | 1 Level | ≥ 15 V | Input impedance | typ. 900 Ω | Number of sensors | max. 10 |
| Input impedance | typ. 900 Ω |
| Repeat accuracy | R | ± 3 mm |
| Response delay | ≤ 100 ms |
| Ripple | ≤ 10 % |
| Switching frequency | ≤ 4 Hz |
| Time delay before availability | t v | ≤ 125 ms |
| Transducer frequency | approx. 200 kHz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature drift | ≤ ± 1.5 % of full-scale value |
| Other | |
| 0 Level | ≤ 3 V |
| 1 Level | ≥ 15 V |
| Adjustment range | 150 ... 2000 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Construction type | Cylindrical |
| Dead band | 0 ... 100 mm |
| Default setting | 150 ... 2000 mm ( adjustable via potentiometer ) |
| Degree of protection | IP65 |
| Diameter | 30 mm |
| Housing | brass, nickel-plated |
| Housing brass, nickel-plated Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam | Housing | brass, nickel-plated | Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Input/output type | 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input |
| Installation position | any position |
| Interface type | Infrared |
| LED green/yellow | yellow: object in evaluation range green: Teach-In |
| LED yellow | switching state switch output |
| Length | 126 mm |
| Length 126 mm Diameter 30 mm | Length | 126 mm | Diameter | 30 mm |
| Load resistor | ≤ 500 Ω |
| Mass | 170 g |
| Mode | point-to-point connection |
| Number of sensors | max. 10 |
| Output type | 1 switch output PNP, NO ( NC contact programmable ) |
| Permissible cable length | max. 300 m |
| Potentiometer | switching output adjustable |
| Sensing range | 100 ... 2000 mm |
| Shock resistance | 30 g , 11 ms period |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
| Standard target plate | 100 mm x 100 mm |
| Switching hysteresis | 20 mm ( programmable ) |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| UL approval | cULus Listed, Class 2 Power Source |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm |
Documents
No documents are linked to this part yet.