All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | max. 200 mA |
| Operating voltage | U B | 15 ... 30 V DC , PELV |
| Power consumption | P 0 | 3 W |
| Switching current | 150 mA each output |
| Switching voltage | Operating voltage |
| AC and DC characteristics | |
| Clock pulse frequency | 600 MHz |
| Clock pulse frequency 600 MHz Speed of computation 4800 MIPS Digital resolution 32 Bit | Clock pulse frequency | 600 MHz | Speed of computation | 4800 MIPS | Digital resolution | 32 Bit |
| Digital resolution | 32 Bit |
| Input impedance | ≥ 27 kΩ |
| Noise immunity | EN 61000-6-2:2005 |
| Resolution | ± 0.1 mm |
| X positon offset | 0 mm |
| X resolution (protocol) | 1 mm |
| Y resolution (protocol) | 1 mm |
| Environment and package | |
| Height | 70 mm |
| Height 70 mm Width 70 mm Depth 50 mm | Height | 70 mm | Width | 70 mm | Depth | 50 mm |
| Operating temperature | 0 ... 60 °C (32 ... 140 °F) , -20 ... 60 °C (-4 ... 140 °F) (non-condensing; prevent icing on the lens!) |
| Speed value in case of error | Error number |
| Storage temperature | -20 ... 85 °C (-4 ... 185 °F) |
| X value in case of error | Error number |
| Y value in case of error | Error number |
| Other | |
| Address | 0 |
| Ambient light limit | 100000 Lux |
| Baud rate | 115200 Bd |
| Bus termination | ON |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| CE conformity | CE |
| Code tape orientation | 0 ° |
| Code tape width | dual-row |
| Connection type | 8-pin, M12 x 1 connector |
| Data output code | binary code |
| Degree of protection | IP67 |
| Depth | 50 mm |
| Depth of focus | ± 20 mm |
| Diagnostic Coverage (DC) | 0 % |
| Emitted interference | EN 61000-6-4:2007+A1:2011 |
| Function input/output | inactive |
| Housing | PC/ABS |
| Housing PC/ABS | Housing | PC/ABS |
| Input type | 1 to 3 functional inputs , programmable |
| Interface type | RS-485 - Interface |
| LED indication | 7 LEDs (communication, alignment aid, status information) |
| Light type | Integrated LED lightning (red) |
| Mass | approx. 160 g |
| Measuring length | max. 10000 m |
| Mission Time (T M ) | 20 a |
| MTTF d | 99 a |
| "No Position" speed value | 127 |
| "No Position" X value | 0 |
| "No Position" Y value | 0 |
| Output type | 1 to 3 switch outputs , PNP , programmable , short-circuit protected |
| Overspeed threshold (protocol) | 12.5 m/s |
| Passage speed | v | ≤ 8 m/s |
| Photobiological safety | exempt group according to EN 62471:2008 |
| Query cycle time | ≥ 10 ms |
| Read distance | 100 mm |
| Reading field | 50 mm x 30 mm |
| Relative humidity | 90 % , non-condensing |
| Scan rate | 40 s -1 |
| Shock resistance | EN 60068-2-27:2009 |
| Speed of computation | 4800 MIPS |
| Termination | Switchable terminal resistor |
| Transfer rate | 38400 ... 230400 Bit/s |
| Type | CMOS , Global shutter |
| Type CMOS , Global shutter | Type | CMOS , Global shutter |
| UKCA conformity | UKCA |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure |
| Vibration resistance | EN 60068-2-6:2008 |
| Width | 70 mm |
Documents
No documents are linked to this part yet.