All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 15 mA |
| Off-state current | I r | ≤ 10 µA |
| Operating current | I L | 0 ... 200 mA , above 70°C max. 150 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Voltage drop | U d | ≤ 2 V |
| AC and DC characteristics | |
| Repeat accuracy | R | 0.3 mm |
| Ripple | 10 % |
| Switching frequency | f | 0 ... 800 Hz |
| Time delay before availability | t v | ≤ 50 ms |
| Environment and package | |
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Other | |
| A | in steel 1.0037 (St37): 2.4 mm in other metal: 1.2 mm |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 18 mm x 18 mm x 1 mm |
| A in steel 1.0037 (St37): 2.4 mm in other metal: 1.2 mm B 12 mm C 18 mm F 24 mm | A | in steel 1.0037 (St37): 2.4 mm in other metal: 1.2 mm | B | 12 mm | C | 18 mm | F | 24 mm |
| Assured operating distance | s a | 0 ... 4.8 mm |
| B | 12 mm |
| Bending radius | > 10 x cable diameter |
| C | 18 mm |
| Cable diameter | 4.3 mm ± 0.2 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Color | black |
| Connection type | cable |
| Core cross section | 0.34 mm 2 |
| Degree of protection | IP67 |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 12 mm |
| F | 24 mm |
| Housing material | brass, nickel-plated |
| Hysteresis | H | 0.06 ... 1.2 mm |
| Installation | quasi flush |
| Length | L | 2 m |
| Length 50 mm Diameter 12 mm | Length | 50 mm | Diameter | 12 mm |
| Mass | 80 g |
| Material | PUR |
| Mission Time (T M ) | 20 a |
| MTTF d | 1740 a |
| Number of cores | 3 |
| Output polarity | DC |
| Output type | NPN |
| Overload resistance | yes |
| Rated operating distance | s n | 6 mm |
| Reduction factor r 304 | 0.7 |
| Reduction factor r Al | 0.28 |
| Reduction factor r Brass | 0.35 |
| Reduction factor r Cu | 0.2 |
| Reverse polarity protection | yes |
| Sensing face | PBT |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Surge suppression | yes |
| Switching function | Normally closed (NC) |
| Switching state indicator | LED, yellow |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA |
| Wire breakage protection | yes |
| Wire end ferrules | yes |
Documents
No documents are linked to this part yet.