All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 9 mA |
| Off-state current | I r | 0 ... 0.5 mA typ. 0.01 mA |
| Operating current | I L | 0 ... 400 mA |
| Operating voltage | U B | 10 ... 60 V |
| Voltage drop | U d | ≤ 2.8 V |
| Voltage drop I L = 100 mA, switching element on | U d | 1 ... 2.6 V typ. 1.8 V |
| Voltage drop I L = 10 mA, switching element on | U d | 0.9 ... 2.4 V typ. 1.7 V |
| Voltage drop I L = 200 mA, switching element on | U d | 1.2 ... 2.8 V typ. 2 V |
| Voltage drop I L = 20 mA, switching element on | U d | 0.9 ... 2.4 V typ. 1.7 V |
| Voltage drop I L = 50 mA, switching element on | U d | 0.9 ... 2.5 V typ. 1.7 V |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 700 Hz |
| Environment and package | |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Other | |
| Actual operating distance | s r | 9 ... 11 mm typ. 10 mm |
| Assured operating distance | s a | 0 ... 8.1 mm |
| Bending radius | > 10 x cable diameter |
| Cable diameter | 6.8 mm ± 0.2 mm |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Color | red |
| Connection type | cable |
| Core cross section | 0.75 mm 2 |
| Degree of protection | IP68 |
| Diagnostic Coverage (DC) | 0 % |
| Diameter | 30 mm |
| Housing material | PBT |
| Hysteresis | H | typ. 5 % |
| Installation | flush |
| Length | L | 2.9 m |
| Length 50 mm Diameter 30 mm | Length | 50 mm | Diameter | 30 mm |
| Material | silicone |
| Mission Time (T M ) | 20 a |
| MTTF d | 1370 a |
| Note | stainless steel nuts included |
| Number of cores | 3 |
| Output polarity | DC |
| Output type | PNP |
| Rated operating distance | s n | 10 mm |
| Reduction factor r 304 | 0.66 |
| Reduction factor r Al | 0.22 |
| Reduction factor r Brass | 0.33 |
| Reduction factor r Cu | 0.19 |
| Reverse polarity protection | reverse polarity protected |
| Sensing face | PBT |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Switching function | Normally open (NO) |
| Switching state indicator | LED, yellow |
| UL approval | cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 400 mA |
| Wire end ferrules | yes |
Documents
No documents are linked to this part yet.