48754

Active

Inductive sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 14.5 mA
Operating current	I L \| 0 ... 200 mA
Operating voltage	U B \| 10 ... 60 V DC
Operating voltage indicator	LED, green
Voltage drop	U d \| ≤ 2.5 V
AC and DC characteristics
Switching frequency	f \| 0 ... 200 Hz
Time delay before availability	t v \| ≤ 50 ms
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Height	30 mm
Height 30 mm Width 30 mm Length 91 mm	Height \| 30 mm \| Width \| 30 mm \| Length \| 91 mm
Other
Assured operating distance	s a \| 0 ... 12.15 mm
CCC approval	Certified by China Compulsory Certification (CCC)
Connection type	screw terminals
Core cross section	up to 2.5 mm 2
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Housing material	PBT
Hysteresis	H \| typ. 5 %
Information for connection	A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Installation	non-flush
Length	91 mm
Maximum core cross-section	without wire end ferrules 2.5 mm 2 , with connector sleeves 1.5 mm 2
Minimum core cross-section	without wire end ferrules 0.5 mm 2 , with connector sleeves 0.34 mm 2
Mission Time (T M )	20 a
MTTF d	932 a
Output polarity	DC
Output type	PNP
Rated operating distance	s n \| 15 mm
Reduction factor r 304	0.73
Reduction factor r Al	0.39
Reduction factor r Cu	0.36
Reverse polarity protection	yes
Sensing face	PBT
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	complementary
Switching state indicator	LED, yellow
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 200 mA
Width	30 mm

Documents

No documents are linked to this part yet.