All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Operating voltage | U B | 10 ... 30 V DC , ripple 10 % SS |
| Power consumption | P 0 | ≤ 900 mW |
| AC and DC characteristics | |
| Load impedance | current output: ≤ 500 Ohm voltage output: ≥ 1000 Ohm |
| Repeat accuracy | ≤ 0.1 % of full-scale value |
| Resolution | evaluation range [mm]/4000, but ≥ 0.35 mm |
| Response delay | 65 ms minimum 195 ms factory setting |
| Transducer frequency | approx. 180 kHz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature influence | ≤ 2 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation) |
| Temperature/teach-in connector | Temperature compensation , Evaluation range programming , output function setting |
| Other | |
| Adjustment range | 120 ... 2000 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Common mode operation | max. 30 Hz |
| Common mode operation max. 30 Hz Multiplex operation ≤ 30/n Hz, n = number of sensors | Common mode operation | max. 30 Hz | Multiplex operation | ≤ 30/n Hz, n = number of sensors |
| Connection type | Cable connector , M12 x 1 , 5-pin , 4-wire |
| Control drawing | 116-0168 |
| Dead band | 0 ... 80 mm |
| Degree of protection | IP65 |
| Deviation of the characteristic curve | ≤ 0.2 % of full-scale value |
| Diameter | 35 mm |
| Hazardous Location | E199034 |
| Housing | 1.4303 stainless steel plastic parts PBT |
| Housing 1.4303 stainless steel plastic parts PBT Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam | Housing | 1.4303 stainless steel plastic parts PBT | Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Interface type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit |
| LED green | solid: Power-on flashing: Standby mode or program function object detected |
| LED red | solid: temperature/program plug not connected flashing: fault or program function object not detected |
| LED yellow 1 | solid: object in evaluation range flashing: program function |
| LED yellow 2 | solid: object in detection range flashing: program function |
| Length | 172 mm |
| Length 172 mm Diameter 35 mm | Length | 172 mm | Diameter | 35 mm |
| Multiplex operation | ≤ 30/n Hz, n = number of sensors |
| Note | Individual components: UC-2000-30GM-IUR2-V15; V1-G-2M-PVC; M-106 impact adapter; ADAPT-ALUM*-M30X1/2" NPT/HB**** |
| Ordinary Location | E87056 |
| Ordinary Location 1007121 | Ordinary Location | 1007121 |
| Ordinary Location E87056 Hazardous Location E199034 Control drawing 116-0168 | Ordinary Location | E87056 | Hazardous Location | E199034 | Control drawing | 116-0168 |
| Output type | 1 current output 4 ... 20 mA 1 voltage output 0 ... 10 V |
| Sensing range | 80 ... 2000 mm |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
| Standard target plate | 100 mm x 100 mm |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
Documents
No documents are linked to this part yet.