45140

Active

Inductive transmitter system

All alternatives

Technical parameters

Power
Current consumption	max. 1000 mA
Input current	≤ 1 mA
Load current	max. 50 mA
Number of signal channels	8
Operating voltage	U B \| 24 V DC ± 10 %
Voltage drop	U d \| ≤ 2.5 V
Environment and package
Ambient temperature	0 ... 50 °C (32 ... 122 °F)
Storage temperature	-25 ... 85 °C (-13 ... 185 °F)
Other
CCC approval	CCC approval / marking not required for products rated ≤36 V
Degree of protection	IP20
Diagnostic Coverage (DC)	0 %
EMC Directive 89/336/EEC	EN 61000-6-2:2001, EN 61000-6-4:2001, EN 50295:1999
EMC Directive 89/336/EEC EN 61000-6-2:2001, EN 61000-6-4:2001, EN 50295:1999	EMC Directive 89/336/EEC \| EN 61000-6-2:2001, EN 61000-6-4:2001, EN 50295:1999
Housing	PA 66-FR
Housing PA 66-FR	Housing \| PA 66-FR
Input type	Activation input signal level: ≥ 15 V = active, ≤ 3 V inactive
Installation	DIN rail mounting
Internal resistor	≥ 15 kΩ
Mass	106 g
Mission Time (T M )	20 a
MTTF d	245 a
Note	Maximum cable length between WIS module and WIS transmitter must not exceed 5 m.
Number	1
Output type	1 Status output (high with proper transfer) and 8 Switch outputs PNP, NO. (switched high) , overload and short-circuit resistant
Response time	≤ 200 ms ( static operation , the transmission heads stand opposite to each other )
Reverse polarity protection	reverse polarity protected
Signal transfer direction	from secondary side to primary side
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching state	8 x LED, yellow
Transfer indicator	Tx \| LED, green

Documents

No documents are linked to this part yet.