43630

Active

Inductive power clamp sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 28 mA
Operating current	I L \| 0 ... 100 mA
Operating voltage	U B \| 10 ... 30 V
Operating voltage indicator	LED green
Voltage drop	U d \| ≤ 3 V
AC and DC characteristics
Switching frequency	f \| 0 ... 100 Hz
Environment and package
Ambient temperature	0 ... 50 °C (32 ... 122 °F)
Height	18 mm
Height 18 mm Width 18 mm Length 47 mm	Height \| 18 mm \| Width \| 18 mm \| Length \| 47 mm
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Other
Alternating magnetic field	B \| 100 mT
Assured operating distance	s a \| 0 ... 1.62 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	Connector plug
Constant magnetic field	B \| 100 mT
Degree of protection	IP65
Diagnostic Coverage (DC)	0 %
Flexible lead, housing-sensor	80 mm , PUR (halogen-free) ; Outlet position - 1
Housing material	amplifier; PBT, PA6 + GD-ZN AL4 oscillators; PBT
Installation	non-flush
Length	47 mm
Mission Time (T M )	20 a
MTTF d	1445 a
Number of pins	4
Output polarity	DC
Output type	PNP
Rated operating distance	s n \| 2 mm
Reduction factor r 304	0.75
Reduction factor r Al	0.45
Reduction factor r Cu	0.35
Reverse polarity protection	reverse polarity protected
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	2 x normally open (NO)
Switching state indicator	Switching state "closed" = LED red (S2) switching state "open" = LED yellow (S1)
Threading	M12 x 1
Threading M12 x 1 Number of pins 4	Threading \| M12 x 1 \| Number of pins \| 4
Tightening torque, fastening screws	sensor: ≤ 1.8 Nm satellite: ≤ 0.3 Nm
Tuning-out	typically 1 s
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA
Width	18 mm

Documents

No documents are linked to this part yet.