All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | < 60 mA |
| Operating voltage | U B | 18 ... 30 V DC , ripple 10 % SS |
| Rated operating current | I e | 2 x 100 mA , short-circuit/overload protected |
| Voltage drop | U d | ≤ 3 V |
| AC and DC characteristics | |
| Impedance | ≥ 10 kΩ |
| Switch-off delay | t off | ≤ 600 µs |
| Switch-on delay | t on | ≤ 600 µs |
| Time delay before availability | t v | < 500 ms |
| Transducer frequency | 255 kHz |
| Environment and package | |
| Ambient temperature | 0 ... 60 °C (32 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Other | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection type | Cable connector M12 x 1 , 5-pin with PVC Cable, 150 mm |
| Degree of protection | IP67 |
| Diameter | 18 mm |
| Housing | nickel plated brass; plastic components: PBT |
| Housing nickel plated brass; plastic components: PBT Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam | Housing | nickel plated brass; plastic components: PBT | Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Input type | Teach-In input 0-level: -U B ... -U B + 1V 1-level: +U B - 1 V ... +U B |
| LED green | Display: readiness |
| LED red | indication: no sheet detected (Air) |
| LED yellow | Display: splice detected |
| Length | 53 mm |
| Length 53 mm Diameter 18 mm | Length | 53 mm | Diameter | 18 mm |
| Mass | 150 g |
| Output type | 2 switch outputs PNP, NC |
| Pulse extension | ≥ 120 ms programmable |
| Pulse length | ≥ 500 ms |
| Sensing range | 20 ... 60 mm , optimal distance: 45 mm |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| UL approval | cULus Listed, General Purpose |
Documents
No documents are linked to this part yet.