40862
Pepperl+Fuchs, Inc.Germany

40862

Active

Diffuse mode sensor, plastic housing, 2500 mm adjustable detection range, infrared light, light on, 2 push-pull outputs, fixed cable

See alternativesAsk AI FAE

All alternatives

View full report

Technical parameters

Power
No-load supply currentI 0 | ≤ 20 mA
Operating voltageU B | 10 ... 30 V DC , class 2
Switching currentmax. 100 mA
Switching voltagemax. 30 V DC
Voltage dropU d | ≤ 1.5 V
AC and DC characteristics
Ripple10 %
Switching frequencyf | ≤ 500 Hz
Environment and package
Ambient temperature-30 ... 55 °C (-22 ... 131 °F)
Height62 mm
Height 62 mm Width 18 mm Depth 35 mmHeight | 62 mm | Width | 18 mm | Depth | 35 mm
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Other
Ambient light limit50000 Lux ; according to EN 60947-5-2
CCC approvalCCC approval / marking not required for products rated ≤36 V
Connection2 m fixed cable , 4-wire
Control elementsSensing range adjuster
Degree of protectionIP67
Depth35 mm
Detection range0 ... 2500 mm adjustable
Diagnostic Coverage (DC)0 %
Diameter of the light spotapprox. 50 mm at a distance of 2.5 m
Function indicatorLED yellow, lights up with receiver lit
HousingPolycarbonate
Housing Polycarbonate Optical face PMMAHousing | Polycarbonate | Optical face | PMMA
Light sourceIRED
Light typemodulated infrared light , 850 nm
Mass133 g
Mission Time (T M )20 a
MTTF d920 a
Opening angle2 °
Operation indicatorLED green: power on
Optical facePMMA
Polarization filterno
Product standardEN 60947-5-2
Protection classII , rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit basis insulation of input circuit according to EN 50178, rated insulation voltage 240 V AC
Reference targetstandard white 200 mm 200 mm
Response time≤ 1 ms
Signal output2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected
Switching typelight-on
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
Width18 mm

Documents

No documents are linked to this part yet.