40661

Active

Read head, RS-485 interface, with RS-485 terminal resistor

All alternatives

Power
Operating voltage	U B \| 10 ... 30 V DC
Power consumption	P 0 \| 9 VA at 24 V DC
AC and DC characteristics
Noise immunity	DIN EN 61000-6-2
Resolution	± 0.42 mm (1,200 positions/m)
Environment and package
Operating temperature	-40 ... 60 °C (-40 ... 140 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Other
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	5-pin, M12 x 1 connector
CSA approval	cCSAus Certified, General Purpose Class 2 power source
Data output code	binary code
Degree of protection	IP54
Diagnostic Coverage (DC)	0 %
Emitted interference	DIN EN 61000-6-4
Free tolerances to code rail	horizontal: 10 mm ( ± 5 mm ) vertical: 10 mm ( ± 5 mm )
Housing	ABS , Polycarbonate , Polyamide (PA)
Housing ABS , Polycarbonate , Polyamide (PA)	Housing \| ABS , Polycarbonate , Polyamide (PA)
Interface type	RS 485 interface
Mass	500 g
Measuring length	max. 327 m
Mission Time (T M )	10 a
MTTF d	66 a
Order information	Mounting plate included with delivery
Passage speed	v \| ≤ 12.5 m/s
Photobiological safety	exempt group according to EN 62471:2008
Protocol	3 , with Parity (9 Bit/Byte)
Relative humidity	90 % , non-condensing
Shock resistance	DIN EN 60068-2-27, half sine 30 g, 18 ms
Termination	with RS 485 termination
Transfer rate	19.2 kBit/s
Vibration resistance	DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles

No documents are linked to this part yet.