All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Off-state current | I r | ≤ 1 mA |
| Operating current | I L | 2 ... 100 mA |
| Operating voltage | U B | 6 ... 30 V |
| Voltage drop | U d | ≤ 5.5 V |
| AC and DC characteristics | |
| Switching frequency | f | 5 Hz |
| Environment and package | |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Other | |
| Actuating element | Nonferrous targets |
| Assured operating distance | s a | 0 ... 8.1 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection type | Connector plug |
| Degree of protection | IP67 / IP68 / IP69K - cordset dependent according to cable specification |
| Diameter | 30 mm |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Hysteresis | H | 3 ... 15 typ. 10 % |
| Installation | flush |
| Length | 65 mm |
| Length 65 mm Diameter 30 mm | Length | 65 mm | Diameter | 30 mm |
| Mass | 166 g |
| Number of pins | 3 |
| Operation indicator | 4-way LED Yellow: output |
| Output polarity | DC |
| Output type | Two-wire |
| Rated operating distance | s n | 10 mm |
| Reduction factor r 304 | 0 |
| Reduction factor r Al | 1 |
| Reduction factor r Brass | 0.9 |
| Reduction factor r Cu | 1.1 |
| Reduction factor r St37 | 0 |
| Reverse polarity protection | reverse polarity tolerant |
| Sensing face | Stainless steel 1.4305 / AISI 303 |
| Short-circuit protection | no |
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| Switching function | Normally open (NO) |
| Threading | M12 x 1 |
| Threading M12 x 1 Number of pins 3 | Threading | M12 x 1 | Number of pins | 3 |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA |
Documents
No documents are linked to this part yet.