40603

Active

Inductive sensor

All alternatives

Technical parameters

Power
Current consumption	< 14 mA
Off-state current	I r \| ≤ 10 µA
Operating current	I L \| ≤ 200 mA For a temperature range above 50°C, the permissible operating current IL ≤ 150 mA
Operating voltage	U B \| 10 ... 30 V DC
Voltage drop	U d \| ≤ 2 V DC
AC and DC characteristics
Switching frequency	f \| 100 Hz
Environment and package
Ambient temperature	-40 ... 70 °C (-40 ... 158 °F)
Other
Actuating element	Ferrous targets
Assured operating distance	s a \| 0 ... 1.62 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	Connector plug
Degree of protection	IP67 / IP68 / IP69K - cordset dependent according to cable specification
Diagnostic Coverage (DC)	0 %
Diameter	12 mm
Housing material	Stainless steel 1.4305 / AISI 303
Hysteresis	H \| 3 ... 15 typ. 5 %
Installation	flush
Length	65 mm
Length 65 mm Diameter 12 mm	Length \| 65 mm \| Diameter \| 12 mm
Mission Time (T M )	20 a
MTTF d	990 a
Number of pins	4
Operation indicator	4-way dual LED Green: power Yellow: output
Output polarity	DC
Output type	PNP
Rated operating distance	s n \| 2 mm
Reduction factor r 304	0.25
Reduction factor r 316Ti	0.1
Reduction factor r Al	0
Reduction factor r Brass	0
Reduction factor r Cu	0
Reduction factor r St37	1
Reverse polarity protection	reverse polarity protected
Sensing face	Stainless steel 1.4305 / AISI 303
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally open (NO)
Threading	M12 x 1
Threading M12 x 1 Number of pins 4	Threading \| M12 x 1 \| Number of pins \| 4
UL approval	cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA

Documents

No documents are linked to this part yet.